Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Half-height blade server, silver metal chassis, two drive bays visible

DELL

DELL PowerEdge M640 blade server 2x Xeon 8260 24-core 64GB DDR4 2x 960GB SSD H330 57810S-K iDRAC9 Enterprise

SKU CH-XSZF-DVNM9

Half-height blade server with dual 24-core Xeon 8260 CPUs, 64GB DDR4 ECC memory, dual 960GB SATA SSDs on a PERC H330 controller, and iDRAC9 Enterprise management

  • TypeBlade
  • Rack HeightBlade
  • CPU TypeIntel Xeon
  • CPU Speed2.40 GHz
  • CPU SocketLGA 3647
  • Number of CPU Cores24-Core Processor

Installed Memory Size 64GB

SSD (Installed) 2 x 960GB SATA SSD

  • Dual Xeon Platinum 8260 CPUs provide 24 cores each at 2.4 GHz base and 3.9 GHz turbo
  • 64 GB DDR4 2933 MHz ECC memory across 16 slots supports up to 1.5 TB
  • PERC H330 controller enables RAID 0/1/5/10/50 with 12 Gb/s SAS/SATA
  • Two 960 GB SATA SSDs deliver fast read/write for boot and data
  • iDRAC9 Enterprise and 57810S-K dual 10 Gb ports simplify remote management and networking

Half-height blade for dense compute

The Dell PowerEdge M640 is a half-height blade server built for the PowerEdge MX and M1000e chassis. It carries two Intel Xeon Platinum 8260 processors, each with 24 cores running at 2.4 GHz and a 3.9 GHz turbo. The system includes 64 GB of DDR4 registered ECC memory across 16 slots, with a maximum capacity of 1.5 TB.

Storage and network limits

The PERC H330 controller supports RAID 0, 1, 5, 10 and 50 over SATA and SAS interfaces. Two 960 GB SATA SSDs are installed in the 2.5-inch bays. The Broadcom 57810S-K daughter card provides dual-port 10 Gb connectivity. The blade form factor means it cannot operate outside a compatible MX or M1000e enclosure.

Remote management and missing parts

iDRAC9 Enterprise enables full out-of-band management, firmware updates and virtual console access over the network. The Matrox G200 graphics core provides basic 2D output with 8 MB of video memory. The unit ships without a front bezel, ready rails or an operating system, so those items must be sourced separately for deployment.

Přednosti

  • Dual Xeon Platinum 8260 CPUs provide 24 cores each at 2.4 GHz base and 3.9 GHz turbo
  • 64 GB DDR4 2933 MHz ECC memory across 16 slots supports up to 1.5 TB
  • PERC H330 controller enables RAID 0/1/5/10/50 with 12 Gb/s SAS/SATA
  • Two 960 GB SATA SSDs deliver fast read/write for boot and data
  • iDRAC9 Enterprise and 57810S-K dual 10 Gb ports simplify remote management and networking

Specifikace

BrandDELL
SeriesPowerEdge M640
TypeBlade
Rack HeightBlade
CPU TypeIntel Xeon
CPU Speed2.40 GHz
CPU SocketLGA 3647
Number of CPU Cores24-Core Processor
# of Processors Installed2
MAX Processors2
Installed Memory Size64GB
Memory TypeDDR4
Max Memory Capacity2TB
Number of Memory Slots16
Storage ControllerDell Perc H330 Controller
HDD InterfaceSATA/SAS
SSD (Installed)2 x 960GB SATA SSD
Raid LevelRAID 0/1/5/10/50
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Broadcom 57810S-K 10Gb Dual Port Blade Network Daughter Card
Management PortRJ 45
Operating SystemNo

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.