Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 2U rack server with front bezel, eight 2.5-inch drive bays and dual hot-swap power supplies

DELL

DELL PowerEdge R730 2U rack server 2x Xeon E5-2683 v4 2.1GHz 16-core 128GB DDR4 2x 800GB SSD

SKU CH-Y0BM-T6PMY

2U rack server with dual 16-core Xeon CPUs at 2.1 GHz, 128 GB DDR4 ECC memory, dual 800 GB SATA SSDs, PERC H730 RAID controller, quad-port 1 GbE and 10 GbE networking, iDRAC8 Enterprise management.

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.10 GHz
  • CPU SocketLGA 2011-3
  • Dual 16-core Xeon processors at 2.1 GHz turbo to 3.0 GHz for heavy compute
  • 128 GB DDR4 2400 MHz ECC memory scales to 1.5 TB capacity
  • PERC H730 RAID controller supports levels 0 1 5 6 10 50 60
  • Dual 800 GB SATA SSDs on 12 Gb/s SAS/SATA backplane
  • Quad-port 1/10 GbE networking with iDRAC8 Enterprise remote management

Dual Xeon 16-core server for virtualisation

The PowerEdge R730 is a 2U rack server equipped with two Intel Xeon E5-2683 v4 processors running at 2.1 GHz with 16 cores each. It ships with 128 GB of DDR4 2400 MHz registered ECC memory across 24 slots, supporting up to 1.5 TB total. This configuration targets midsize and large enterprises running data warehouses, VDI, databases or HPC data nodes.

Hot-swap bays, redundant power and remote management

Eight 2.5-inch drive bays support SATA and SAS devices through a PERC H730 controller with 1 GB cache and battery backup, offering RAID 0, 1, 5, 6, 10, 50, 60 and pass-through modes. Two 800 GB SATA SSDs are installed. Networking uses an Intel X520/I350 daughter card providing two 1 GbE and two 10 Gb SFP+ ports. Dual 750 W platinum power supplies and iDRAC8 Enterprise enable hot-swap maintenance and out-of-band control. Rails and bezel are included.

Check rack depth, CPU cooler clearance

Verify that your rack can accommodate a 2U chassis with sliding rails and that airflow meets the dual 16-core thermal load. The LGA 2011-3 sockets are fully populated, so no further CPU upgrades are possible. Memory expansion requires registered ECC DDR4 modules compatible with the 24 slots and 1.5 TB limit. Ensure your switch or uplink supports SFP+ transceivers for the 10 Gb links.

Přednosti

  • Dual 16-core Xeon processors at 2.1 GHz turbo to 3.0 GHz for heavy compute
  • 128 GB DDR4 2400 MHz ECC memory scales to 1.5 TB capacity
  • PERC H730 RAID controller supports levels 0 1 5 6 10 50 60
  • Dual 800 GB SATA SSDs on 12 Gb/s SAS/SATA backplane
  • Quad-port 1/10 GbE networking with iDRAC8 Enterprise remote management

Specifikace

BrandDELL
SeriesPowerEdge R730
ModelR730
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.10 GHz
CPU SocketLGA 2011-3
Number of CPU Cores16-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size128GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSATA
SSD (Installed)2 x 800GB SATA SSD
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features8 x 2.5" SATA/SAS Hot-Plug Drive Bays

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What interface does the PERC H730 controller use and what throughput does it provide?

The PERC H730 is a 12Gb/s SAS/SATA controller supporting RAID 0, 1, 5, 6, 10, 50 and 60 with a 1GB cache and battery backup.

What physical space and mounting hardware does the server require?

The server is a 2U rack unit and includes ready rails plus a front bezel for installation.

How is the server installed and what step is often missed?

Mount the chassis using the included ready rails, connect redundant 750W power supplies, then configure the PERC H730 RAID array before installing an operating system.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.