Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

DELL

DELL PowerEdge R730 8LFF 2x Xeon E5-2609 v3 384GB DDR4

SKU CH-1FDF-0TSC7

Eight 3.5-inch drive bays, dual 1.9 GHz Xeon processors and 384 GB DDR4 memory in a 2U rack server

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed1.9GHz
  • # of Processors Installed2
  • MAX Processors2
  • Installed Memory Size384GB
  • Dual Xeon E5-2609 v3 CPUs deliver 12 cores at 1.9GHz for parallel workloads
  • 384GB DDR4 ECC registered memory supports large virtualisation clusters
  • Eight 3.5-inch drive bays with PERC H730 SAS controller enable high-capacity storage arrays
  • iDRAC8 Enterprise licence provides full remote lifecycle management
  • Redundant 495W power supplies maintain uptime during module failure

Dell PowerEdge R730 8-bay server

The Dell PowerEdge R730 is a 2U rack server fitted with two Intel Xeon E5-2609 v3 processors at 1.9GHz and 384GB of DDR4 ECC registered memory. Eight 3.5-inch drive bays connect through a PERC H730 SAS controller supporting SATA drives. Remote management uses iDRAC8 Enterprise. Dual 495W power supplies are installed.

Suits memory-heavy workloads in an eight-bay chassis

This configuration serves databases, virtualization hosts or backup targets that benefit from 384GB RAM and room for eight SATA drives. The two six-core CPUs provide moderate thread count. Buyers who need more than two processors, more than 768GB maximum memory, or a different drive interface should look at another platform.

PERC H730 SAS controller with eight 3.5-inch bays

The storage subsystem centres on a Dell PERC H730 RAID controller driving up to eight 3.5-inch SATA bays. No drives are included, so the buyer must supply compatible SATA disks. This controller and bay count define whether the server fits the intended storage layout.

Přednosti

  • Dual Xeon E5-2609 v3 CPUs deliver 12 cores at 1.9GHz for parallel workloads
  • 384GB DDR4 ECC registered memory supports large virtualisation clusters
  • Eight 3.5-inch drive bays with PERC H730 SAS controller enable high-capacity storage arrays
  • iDRAC8 Enterprise licence provides full remote lifecycle management
  • Redundant 495W power supplies maintain uptime during module failure

Specifikace

BrandDELL
SeriesPowerEdge
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed1.9GHz
# of Processors Installed2
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)8,00
Storage ControllerDell PERC H730 SAS Controller
HDD InterfaceSATA
GPU TypeIntegrated Graphics
Remote ManagementiDRAC8 - Enterprise License
Dimensions36 x 24 x 10 in
Weight40

Otázky k tomuto produktu

What power supplies must already be present in the rack to run the dual 495W units in this R730?

The server includes two 495W power supplies for 12th Gen; ensure the rack PDU can deliver enough 12 V current for both units simultaneously.

Will the PERC H730 controller recognise older 3.5 inch SATA drives I want to reuse in the eight drive bays?

The H730 SAS controller supports SATA HDDs, so existing 3.5 inch SATA drives can be installed in the eight bays and configured in RAID.

How can I confirm the iDRAC8 Enterprise licence is active after the firmware update?

Log into the iDRAC web interface; the dashboard will display Enterprise licence status and show both Xeon E5-2609 v3 CPUs at 1.9GHz with 384GB DDR4 memory.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.