Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black steel E-ATX tower with dual tempered glass side panels and pre-installed ARGB fans visible

DIYPC

DIYPC ARGB-N6-BK E-ATX PC case, black steel and tempered glass

SKU CH-X1M4-K2SW2 MPN ARGB-N6-BK

E-ATX steel chassis with dual tempered-glass panels, four pre-installed 120 mm ARGB PWM fans and top 360 mm radiator support for high-airflow builds

  • TypeE-ATX /ATX case
  • ColorBlack
  • Case MaterialSteel / Tempered Glass
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini-ITX

Options ARGB-N6 (Black)

  • E-ATX to Mini-ITX boards fit with BTF back-plug support
  • Four pre-installed 120 mm ARGB PWM fans deliver airflow out of the box
  • Top 360 mm and rear 140 mm radiator mounts enable liquid cooling
  • Top I/O includes 2 USB 3.0, Type C and HD audio for fast peripheral access
  • Dual tempered glass panels give a 270° view of the build

Panoramic E-ATX case with 270° view

The DIYPC ARGB-N6-BK is a steel-and-tempered-glass chassis that supports E-ATX, ATX, Micro-ATX and Mini-ITX motherboards, including back-plug designs. Dual glass side panels give a 270° view of the interior. A top-mounted I/O panel provides two USB 3.0 ports, one USB Type-C port and HD audio jacks.

Upgrade from mid-tower with limited radiator space

This case replaces smaller enclosures that cannot fit a 360 mm top radiator or a 140 mm rear radiator. It also removes the 425 mm GPU length ceiling found on many compact cases. The jump is worthwhile when a build needs full-size liquid cooling and long graphics cards in a single chassis.

Sustained load airflow with ten-fan capacity

Four 120 mm ARGB PWM fans are pre-installed — three reverse-blade units on the motherboard side and one at the rear — and the layout supports up to ten fans in total. Optional 120 mm or 140 mm fans can be added at the top, bottom and PSU top. The PWM ARGB hub and case button or motherboard sync keep lighting and speed coordinated during extended sessions.

Přednosti

  • E-ATX to Mini-ITX boards fit with BTF back-plug support
  • Four pre-installed 120 mm ARGB PWM fans deliver airflow out of the box
  • Top 360 mm and rear 140 mm radiator mounts enable liquid cooling
  • Top I/O includes 2 USB 3.0, Type C and HD audio for fast peripheral access
  • Dual tempered glass panels give a 270° view of the build

Specifikace

BrandDIYPC
ModelARGB-N6-BK
TypeE-ATX /ATX case
ColorBlack
Case MaterialSteel / Tempered Glass
With Power SupplyNo
Power Supply MountedBottom
Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini-ITX
Side Panel2 x Sides Tempered Glass Panel
LEDARGB
Internal 3.5" Drive Bays3
Expansion Slots7
Front Ports2 x USB 3.0 / 1 x Type C / Audio In & Out (HD)
Fan OptionsTop: 3 x 120mm or 140mm fan (Optional)
MB Side: 3 x 120mm ARGB Reverse Blade PWM Fan (pre-installed)
Rear: 1 x 120mm ARGB PWM fan (pre-installed)
Bottom: 1 x 120mm fan (Optional)
PSU top : 2 x 120mm fan (Optional)
Pre-installed FansRear - 1 x 120mm / Side - 3 x 120mm
Radiator OptionsTop support up to 360mm ,rear x 140mm liquid cooler
Max GPU Length425 mm
Max CPU Cooler Height180 mm
Max PSU Length200 mm
Dimensions17.8" x 9.52" x 18"
FeaturesDIYPC ARGB-N6-BK is a panoramic ATX case with a 270 view of your masterpiece for
building high-performance system. It has front and side tempered glass panel, w/top mesh
design allow optimized air flow. The case’s design has bigger interior space to accommodate and
improve cooling performance (can support up to 425mm x GPU and 360mm radiator x top).
It supports up to 200mm long full ATX power supply to run the most power hungry system.
Advanced cable management design – routing the main cable is easy and quick through a hidden channel.
There is a large space behind the motherboard fo
Přepravní hmotnost8.17 kg
Rozměry balení521 × 508 × 292 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will a 360 mm radiator fit in the top without hitting the motherboard?

The top supports radiators up to 360 mm, and the motherboard tray has clearance for standard E-ATX boards, so a 360 mm unit will install without interference.

Can I control the pre-installed ARGB fans without a 5 V ARGB header on my motherboard?

Yes, a manual RGB button on the top I/O panel lets you cycle lighting modes directly, while the included PWM ARGB hub also accepts a 5 V 3-pin header for motherboard sync.

What is the longest graphics card I can install with the side fans in place?

The case allows graphics cards up to 425 mm long; the three 120 mm side fans are mounted on the motherboard tray and do not reduce that clearance.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.