Eluktronics
Eluktronics MANIX 4TB NVMe internal SSD
M.2 2280 NVMe drive with 4000 GB capacity and sequential speeds up to 4700 MB/s read and 3400 MB/s write
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity4TB
- Memory ComponentsQLC
- InterfacePCI-Express 4.0 x4
- Massive 4TB capacity stores games and media
- Up to 4700 MB/s read speeds load apps instantly
- Up to 3400 MB/s write speeds save large files fast
- PCIe 4.0 x4 interface unlocks full NVMe performance
- 5 million hour MTBF backs long-term reliability
Capacity and form factor
The Eluktronics MANIX 4000GB-G4SS is a 4TB internal solid-state drive built in the M.2 2280 form factor. It connects through a PCIe 4.0 x4 interface using the NVMe protocol. The drive uses 3D QLC NAND flash and is assembled double-sided with a height of 2.23mm.
Ideal use and limits
This drive suits users who need a large, single volume for games, media libraries or project files and who have a motherboard with an M.2 slot wired for PCIe 4.0 x4. Systems limited to PCIe 3.0 will see sequential speeds capped at roughly 3400 MB/s. The module ships without a heatsink, so the host board must provide adequate airflow or a dedicated cooler.
Sustained workload behaviour
Under continuous write loads the QLC architecture will settle to lower throughput once its SLC cache fills, and the controller may throttle if the NAND temperature rises without a heatsink. The rated MTBF of 1500000 hours reflects long-term reliability under typical consumer write patterns rather than enterprise-grade endurance. Thermal management becomes the main factor that keeps performance consistent during extended transfers.
Přednosti
- Massive 4TB capacity stores games and media
- Up to 4700 MB/s read speeds load apps instantly
- Up to 3400 MB/s write speeds save large files fast
- PCIe 4.0 x4 interface unlocks full NVMe performance
- 5 million hour MTBF backs long-term reliability
Specifikace
| Brand | Eluktronics |
|---|---|
| Series | MANIX |
| Model | MANIX4000GB-G4SS |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 4TB |
| Memory Components | QLC |
| Interface | PCI-Express 4.0 x4 |
| Max Sequential Read | Up to 4700 MBps |
| Max Sequential Write | Up to 3400 MBps |
| MTBF | 1,500,000 hours |
| HeatSink | without HeatSink |
| Height | 2.23mm |
| Width | 22mm |
| Depth | 80mm |
Otázky k tomuto produktu
Will this drive fit in a standard M.2 2280 slot on a laptop or desktop?
Yes. The drive uses the M.2 2280 form factor measuring 22mm wide, 80mm long and 2.23mm high, which matches the standard slot dimensions used in most modern laptops and desktops.
Does the drive need a heatsink when installed in a PCIe 4.0 motherboard?
The drive ships without a heatsink. The supplier strongly recommends adding one when running at PCIe 4.0 speeds to prevent thermal throttling and keep performance consistent.
What sequential speeds can I expect if my system only supports PCIe 3.0?
On a PCIe 3.0 x4 interface the drive is limited to a maximum of 3400 MB/s read and write due to the bus bandwidth ceiling.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
