Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

EN-Labs

EN-Labs ENU325SSDAL M.2 NVME SATA USB 3.2 Gen 2 10 Gbps enclosure

SKU CH-1Z92-X3QBX

Tool-free USB 3.2 Gen 2 enclosure converts M.2 NVME or SATA SSDs up to 2280 into a 10 Gbps portable drive

  • TypeEnclosure
  • AC AdapterNo
  • Maximum Capacity (per Bay)Up to 4TB
  • FanNo
  • PowerNo
  • USB 3.2 Gen 2 delivers 10 Gbps for NVMe SSDs
  • SATA-based M.2 drives reach up to 6 Gbps throughput
  • RTL9210B controller enables UASP and TRIM support
  • Aluminium alloy shell provides passive cooling in a slim design
  • Fits 2230, 2242, 2260 and 2280 M.2 form factors

What it is and who it's for

This EN-Labs enclosure connects M.2 SSDs to a USB 3.2 Gen 2 port at 10 Gbps. It accepts both NVMe and SATA protocol drives in 2230, 2242, 2260 and 2280 lengths. The RTL9210B controller enables UASP and TRIM for sustained performance. It suits users wanting fast external storage from a spare internal drive.

Before you order

Verify your M.2 drive uses an M-key or B+M-key connector; B-key-only SSDs will not fit. The enclosure does not support PCIe AHCI SSDs, mSATA drives, Wi-Fi cards or MacBook proprietary modules. Your host must provide a USB-C or USB-A port; both cable types are included. Drives up to 4 TB are supported per the specification.

Thermals noise and power

The aluminium alloy shell acts as a passive heatsink with no fan, so operation is silent. Power is drawn entirely from the USB bus — no external adapter is required. Under normal transfer loads the enclosure stays cool to the touch thanks to the metal construction and slim design.

Přednosti

  • USB 3.2 Gen 2 delivers 10 Gbps for NVMe SSDs
  • SATA-based M.2 drives reach up to 6 Gbps throughput
  • RTL9210B controller enables UASP and TRIM support
  • Aluminium alloy shell provides passive cooling in a slim design
  • Fits 2230, 2242, 2260 and 2280 M.2 form factors

Specifikace

BrandEn-Labs
ModelENU325SSDAL
TypeEnclosure
AC AdapterNo
Maximum Capacity (per Bay)Up to 4TB
FanNo
PowerNo

Otázky k tomuto produktu

What cables come with the ENU325SSDAL and do I need to buy a power adapter?

The box includes both a USB Type-C to Type-C cable and a USB Type-A to Type-C cable; no AC adapter is required because the enclosure draws power from the USB port.

My drive is a 2280 M-key NVME — will this enclosure run it at the advertised 10 Gbps?

Yes, the RTL9210B controller supports PCI-E based M-key NVME SSDs up to 10 Gbps over USB 3.2 Gen 2, and the 2280 form factor fits the internal slot.

If I plug this into a USB 3.0 port, what speed will I actually see with a SATA M.2 SSD?

The enclosure is backward compatible with USB 3.1 Gen 1 and USB 3.0 up to 5 Gbps, so a SATA M.2 SSD will be limited to that 5 Gbps link speed rather than its native 6 Gbps.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.