Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Metal bracket adapter with SATA data and Molex power cables

EN-Labs

EN-Labs KIT-2.5-3.5-MA 2.5 to 3.5 hard drive adapter with 18" SATA cable and 6" Molex power cable

SKU CH-9DHR-1F7QD

Converts a 3.5" bay to hold a 2.5" SSD or HDD and includes an 18" SATA data cable plus a 6" Molex-to-SATA power cable

  • SpecificationsCompatible with 2.5" SSD or HDD Allows a standard desktop or
  • FeaturesPower SSD/SATA drives using the included Molex 4 Pin connect
  • Package Contents2.5 to 3.5 HDD adapter, 18 inch SATA Data cable,6 inch Molex
  • Fits 2.5" drives into any 3.5" bay
  • Metal bracket keeps the drive secure
  • 18" SATA cable reaches motherboard ports
  • 6" Molex-to-SATA cable powers the drive
  • Screws included for quick installation

2.5" to 3.5" drive bay converter

This metal mounting bracket converts a standard 3.5" drive bay so that a 2.5" SSD or HDD can be installed securely. It is designed for desktop or server builders whose chassis lack dedicated 2.5" bays. The kit includes the adapter bracket, an 18" SATA III data cable, a 6" Molex 4-pin to SATA 15-pin power cable, and mounting screws.

SATA interface cable length limits

The included 18" SATA III data cable sets the maximum distance between the drive and the motherboard SATA port. The 6" Molex to SATA power cable limits how far the drive can sit from a Molex power connector. Builders must ensure both cables reach their respective connections without strain.

Single 2.5" drive support per bracket

Each bracket accommodates exactly one 2.5" SSD or HDD in a 3.5" bay. Systems requiring multiple 2.5" drives need one bracket and cable set per drive. Buyers who want more storage density than a single 3.5" bay provides cannot meet that need with this kit.

Přednosti

  • Fits 2.5" drives into any 3.5" bay
  • Metal bracket keeps the drive secure
  • 18" SATA cable reaches motherboard ports
  • 6" Molex-to-SATA cable powers the drive
  • Screws included for quick installation

Specifikace

BrandEN-Labs
ModelKIT-2.5-3.5-MA
SpecificationsCompatible with 2.5" SSD or HDD
Allows a standard desktop or server without 2.5" bays to accomodate slim SSD or HDD.
Coverts 3.5" drive bay into 2.5" drive bays to support 2.5" based SSD or hard drives.
With Drive Screws and Adapter Case Screws
with SATA data cable and power cable
FeaturesPower SSD/SATA drives using the included Molex 4 Pin connection on the computer power supply
Supports any computer cases with an available 3.5" drive bay
Converts an available 3.5" HDD bay drive to accommodate 2.5" HDD or SSD (Solid State Drive)
Package Contents2.5 to 3.5 HDD adapter, 18 inch SATA Data cable,6 inch Molex 4Pin to SATA 15pin power cable, screws bag

Otázky k tomuto produktu

Which adapter version should I choose for a 2.5" SSD or HDD?

The KIT-2.5-3.5-MA bracket fits any 2.5" SSD or HDD and converts a 3.5" bay, so there is only one version to select.

What does the 18" SATA III cable mean once installed?

It provides a standard SATA data link up to 18 inches long between the drive and motherboard.

What interface does the included Molex-to-SATA power cable use and what does it supply?

The 6" cable converts a Molex 4-pin connector to a SATA 15-pin plug, delivering power to the 2.5" drive.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.