Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 120 mm square case fan with green LED ring, 11 blades, anti-vibration rubber pads on corners

EN-Labs

EN-Labs SR12025GN 120mm case fan Green LED 1200 RPM 16 dB 53.02 CFM

SKU CH-NXYX-8XRPR

A 120 mm sleeve-bearing case fan with a green LED light-loop, 1200 RPM speed, 53.02 CFM airflow and 16 dB noise

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeSleeve
  • RPM1200RPM+/- 10%
  • Air Flow50-55 CFM
  • Noise Level15 - 20 dBA

LED Green

  • Quiet 16 dB operation keeps builds silent
  • 02 CFM airflow moves heat efficiently
  • Green LED light loop adds visual flair
  • Dual 3-pin and 4-pin power connectors fit most boards
  • Anti-vibration rubber pads reduce chassis resonance

120mm Green LED Case Fan

The EN-Labs SR12025GN is a 120mm case fan designed for PC builders who want quiet airflow with a green LED accent. It runs at 1200 RPM and delivers up to 53.02 CFM while producing only 16 dBA of noise.

Sleeve Bearing with Dual Power Connectors

A sleeve bearing keeps the motor running smoothly for up to 30000 hours of life. The frame includes anti-vibration rubber pads and cut-back corners to boost air passage. Both a 3-pin TX3 header and a Molex 4-pin connector are supplied, so the fan works with older and newer motherboards or direct PSU power.

Upgrade for Stock or Worn Fans

This unit replaces noisy stock fans or ageing sleeve-bearing models that have developed a rattle. The jump is worth it when a builder needs a 120mm green-lit fan that stays near 16 dBA while moving 50 to 55 CFM through a radiator or case vent.

Přednosti

  • Quiet 16 dB operation keeps builds silent
  • 02 CFM airflow moves heat efficiently
  • Green LED light loop adds visual flair
  • Dual 3-pin and 4-pin power connectors fit most boards
  • Anti-vibration rubber pads reduce chassis resonance

Specifikace

BrandEn-Labs
ModelSR12025GN
TypeCase Fan
CompatibilityCase
Bearing TypeSleeve
RPM1200RPM+/- 10%
Air Flow50-55 CFM
Noise Level15 - 20 dBA
Power Connectorcase fan TX3 3pin and molex 4pin
ColorBlack
LEDGreen
FeaturesFeature Solar Eclipse Serial 12CM 3pin case fan Solar Eclipse light loop design, create a very amazing effect Combination of high efficiency heat dissipation and mute,11pcs fan vanes,There is cut back processing on both external and internal of the fan frame to make a large amount of air and improve the heat transfer, 12CM STANDARD SIZE-Compatible with all types of chassis,Suitable for water cooling,Cold discharge light effect, CPU radiator, side through version of MOD light efficiency of fan position in cabinet,Different angles and light show different visual effects. Case fan power
Package Contentscase fan and screws

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What connector does the SR12025GN use and what voltage does it run on?

It uses a TX3 3-pin and a Molex 4-pin connector, both powered from a 12 V DC rail drawing 0.18 A.

What are the exact mounting dimensions and hole spacing for this 120 mm fan?

The frame measures 120 x 120 x 25 mm with standard 120 mm screw holes; four mounting screws are included in the box.

How do I connect the 3-pin and 4-pin leads correctly so the green LED and motor both work?

Plug either the 3-pin header or the Molex 4-pin into the motherboard or PSU — not both at once — and the fan will spin at 1200 RPM with the LED lit.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.