Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black 120mm case fan with white LED light loop and anti-vibration rubber pads

EN-Labs

EN-Labs SR12025WH Solar Eclipse 120mm White LED Case Fan

SKU CH-A4G9-ME0DQ

A 120 mm white-LED case fan with a light-loop frame, sleeve bearing, 1200 RPM speed, 16 dBA noise and 53.02 CFM airflow, powered by 3-pin or 4-pin connectors

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeSleeve
  • RPM1200RPM+/- 10%
  • Air Flow50-55 CFM
  • Noise Level15 - 20 dBA

LED White

  • Solar Eclipse light loop creates striking white LED visuals
  • 15–20 dBA noise level keeps system acoustics low
  • 1200 RPM ±10% delivers up to 53.02 CFM airflow
  • Sleeve bearing rated for 30000 hours of operation
  • Includes both 3-pin and Molex 4-pin connectors plus anti-vibration pads

What this fan is and who it fits

The EN-Labs SR12025WH Solar Eclipse is a 120 mm sleeve-bearing case fan with a white LED light loop. It runs at 1200 RPM ±10 % and delivers 50–55 CFM of airflow at a rated 15–20 dBA. The frame includes cut-back processing on both sides to increase air volume and improve heat transfer. Both a TX3 3-pin and a Molex 4-pin connector are provided for power.

Behaviour under sustained load

At its fixed 1200 RPM speed the fan moves up to 53.02 CFM with a static pressure of 1.073 mm H₂O while drawing 0.18 A at 12 V (3.6 W). The sleeve bearing is rated for 30 000 hours of continuous operation. Because the speed does not vary with temperature, airflow and noise remain constant during long sessions rather than ramping up or down.

What it replaces and when the jump matters

This unit replaces a standard 120 mm case fan that lacks integrated lighting or that runs louder than 20 dBA. The upgrade is worthwhile when a builder wants a white LED loop for visual effect and prefers a steady, low-noise profile over variable-speed control. It is not suited for radiators or restrictive meshes that demand higher static pressure than 1.073 mm H₂O.

Přednosti

  • Solar Eclipse light loop creates striking white LED visuals
  • 15–20 dBA noise level keeps system acoustics low
  • 1200 RPM ±10% delivers up to 53.02 CFM airflow
  • Sleeve bearing rated for 30000 hours of operation
  • Includes both 3-pin and Molex 4-pin connectors plus anti-vibration pads

Specifikace

BrandEn-Labs
ModelSR12025WH
TypeCase Fan
CompatibilityCase
Bearing TypeSleeve
RPM1200RPM+/- 10%
Air Flow50-55 CFM
Noise Level15 - 20 dBA
Power Connectorcase fan TX3 3pin and molex 4pin
ColorBlack
LEDWhite
FeaturesFeature Solar Eclipse Serial 12CM 3pin case fan Solar Eclipse light loop design, create a very amazing effect Combination of high efficiency heat dissipation and mute,11pcs fan vanes,There is cut back processing on both external and internal of the fan frame to make a large amount of air and improve the heat transfer, 12CM STANDARD SIZE-Compatible with all types of chassis,Suitable for water cooling,Cold discharge light effect, CPU radiator, side through version of MOD light efficiency of fan position in cabinet,Different angles and light show different visual effects. Case fan power
Package Contentscase fan and screws

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How loud is the SR12025WH when it runs continuously at 1200 RPM?

The fan is rated at 16 dBA with a tolerance of ±10 %, so expect between roughly 15 and 20 dBA during all-day operation.

Does the fan need a 3-pin or 4-pin motherboard header, and what voltage does it draw?

It includes both a TX3 3-pin and a Molex 4-pin connector and runs on 12 V DC at 0.18 A (3.6 W).

Will the 120 mm frame and screw pattern fit the mounting holes on my older case?

Yes — the 120×120×25 mm dimensions and standard screw holes match the traditional 120 mm fan layout used by virtually all chassis.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.