Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

EN-Labs

EN-Labs USB 3.1 5Gbps M.2 SATA NGFF Enclosure Black Aluminium

SKU CH-WB8R-1RQB8

Houses a SATA-bus M.2 NGFF SSD (B/B+M key, 2230–2280) and connects it via USB 3.1 Type-C at up to 5Gbps

  • ColorBlack
  • MaterialAluminum
  • External InterfaceUSB 3.1
  • HDD Count SupportedNo
  • Number of Bay1
  • FeaturesOnly fit for SATA-bus NGFF M.2 SSD with Key B/B+M,Can't fit

External Interface USB 3.1

  • USB 3.1 Gen 1 up to 5 Gbps transfer speed
  • Works with SATA M.2 NGFF drives B-key and B+M-key
  • Fits 2230 2242 2260 2280 form factors
  • Tool-free installation with included screwdriver and cable
  • No external power needed for portable use

Purpose and compatibility

This enclosure converts a SATA-bus M.2 NGFF SSD with B or B+M key into a portable USB 3.1 5Gbps Type-C drive. It accepts 2230, 2242, 2260 and 2280 form factors and requires no driver installation. Buyers with PCIe NVMe or PCIe AHCI M-key drives cannot use this product.

Sustained transfer behaviour

The USB 3.1 Gen 1 interface delivers up to 5Gbps bandwidth and is backward compatible with USB 3.0, 2.0 and 1.1 speeds. Real-world throughput will follow the limits of the installed SATA SSD and the host controller during extended copy or backup sessions.

Thermals, noise and power

The aluminium housing acts as a passive heatsink for the enclosed SSD without any fan noise. Power is drawn entirely from the USB port so no external adapter is needed. Plug-and-play and hot-swap support let you swap drives without shutting down the host system.

Přednosti

  • USB 3.1 Gen 1 up to 5 Gbps transfer speed
  • Works with SATA M.2 NGFF drives B-key and B+M-key
  • Fits 2230 2242 2260 2280 form factors
  • Tool-free installation with included screwdriver and cable
  • No external power needed for portable use

Specifikace

BrandEn-Labs
Modeln/a
ColorBlack
MaterialAluminum
External InterfaceUSB 3.1
HDD Count SupportedNo
Number of Bay1
FeaturesOnly fit for SATA-bus NGFF M.2 SSD with Key B/B+M,Can't fit any PCI-E based B key and PCIe NVMe / PCIe AHCI NGFF M.2 SSD with Key M devices Pls check your M.2 SSD type before place order. This is a compact NGFF (M.2) SSD Enclosure which will allow you to plug in your NGFF (M.2) SSD and use it as a portable external drive at USB 3.1 Type-C super speed data transfer rate up to USB 3.1(GEN 1) 5Gbps.By formatting this case with a drawer function, there is now extra protection for your hard drive. Reverse compatible with USB 3.0/2.0 and 1.1,and the speed turn with it. this enclosure is a
Package Contents1 x M.2 NGFF(Socket 2 SATA Channel)SSD to USB-C enclosure 1x Screw Driver. 1ft USB-A to USB-C male-male cable
SizeM.2 SATA

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How much heat or noise does the aluminium enclosure produce when the SSD runs all day?

The aluminium housing acts as a passive heatsink with no fan, so the drive stays silent and only warm to the touch during continuous use.

What must I already own to use this enclosure?

A SATA-bus M.2 NGFF SSD with B or B+M key in 2230, 2242, 2260 or 2280 form factor, plus a host device with a USB-C or USB-A port.

Will it work alongside my older USB 2.0 laptop and legacy Windows XP desktop?

Yes, the enclosure is backward compatible with USB 2.0 and 1.1 ports and supports Windows XP, Vista, 7, 8, 8.1, Linux and macOS without drivers.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.