Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
White mid-tower case with rockface mesh front, clear tempered-glass side panel, three 140 mm front fans visible

Fractal Design

Fractal Design Meshify 3 FD-C-MES3A-04 White PC case

SKU CH-SPR4-Z3MMV MPN FD-C-MES3A-04

Mid-tower ATX case with mesh front, three pre-installed 140 mm fans, 20 Gbps USB-C front port, and room for 349 mm graphics cards

  • TypeATX Mid Tower
  • ColorWhite
  • Case MaterialSteel
  • With Power SupplyNo
  • Power Supply MountedBottom
  • Motherboard CompatibilityATX / E-ATX / Micro ATX / Micro ATX / ATX / E-ATX / Micro AT

Options Meshify 3 - TG Clear Tint (White)

  • Ample ventilation and air guide improve GPU cooling performance
  • Rockface-inspired mesh front panel delivers high airflow with distinctive style
  • Supports graphics cards up to 349 mm and E-ATX motherboards for high-end builds
  • Front radiator up to 360 mm and top radiator up to 280 mm with removable brackets
  • Three pre-installed Momentum 14 PWM fans with LCP blades and true FDB bearings

White mid-tower for ATX and E-ATX builds

The Fractal Design Meshify 3 is a white steel ATX mid-tower that accepts ATX, E-ATX, Micro-ATX and Mini-ITX motherboards. It ships with three 140 mm Momentum 14 PWM fans at the front and a clear tempered-glass side panel. The case targets builders who want strong airflow and a clean interior for high-end components.

Tool-less brackets and removable panels simplify

Top, front and side panels lift off without tools, and the radiator brackets at the top and front are also tool-less. The cable cover and new cable aligners keep routing tidy behind the motherboard tray. Builders should note the single bottom dust filter and the lack of 5.25-inch external bays when planning drive layouts.

Front I/O tops out at 20 Gbps USB-C

The top panel provides one USB Type-C 20 Gbps port, two USB 3.0 ports and a combo audio jack. Radiator support reaches 360 mm at the front, 280 mm at the top and 120 mm at the rear. Graphics cards up to 349 mm long and 176 mm tall fit in the seventh slot, while the internal drive area holds two 3.5-inch or four 2.5-inch drives behind the tray plus two dedicated 2.5-inch SSDs on the floor.

Přednosti

  • Ample ventilation and air guide improve GPU cooling performance
  • Rockface-inspired mesh front panel delivers high airflow with distinctive style
  • Supports graphics cards up to 349 mm and E-ATX motherboards for high-end builds
  • Front radiator up to 360 mm and top radiator up to 280 mm with removable brackets
  • Three pre-installed Momentum 14 PWM fans with LCP blades and true FDB bearings

Specifikace

BrandFractal Design
SeriesMeshify 3
ModelFD-C-MES3A-04
Part NumberFD-C-MES3A-04
TypeATX Mid Tower
ColorWhite
Case MaterialSteel
With Power SupplyNo
Power Supply MountedBottom
Motherboard CompatibilityATX / E-ATX / Micro ATX / Micro ATX / ATX / E-ATX / Micro ATX / ATX / Mini ITX / E-ATX / Mini ITX
Side PanelClear TG Side Panel
Dust FiltersBottom
External 5.25" Drive BaysNo
Internal 3.5" Drive Bays2 x 3.5" HDD or 4 x 2.5" SSD behind MB tray
Internal 2.5" Drive Bays2 x Dedicated 2.5" SSD on case floor
Expansion Slots7
Front Ports1 x USB Type-C 20Gbps, 2 x USB 3.0, 1x Audio Combo Jack
Fan OptionsFront: 3 x 120/140 mm (3 x Momentum 14 PWM included)
Top: 2 x 120/140 mm
Rear: 1 x 120 mm
Pre-installed FansFront - 3 x 140mm
Radiator OptionsFront - Up to 280mm / Front - Up to 360mm / Rear - Up to 120mm / Top - Up to 240mm / Top - Up to 280mm
140mm Fans3
Max GPU LengthMax GPU Length: 349 mm
Max GPU Height: 176 mm (slot 7, including cables)
Max CPU Cooler Height173 mm
Max PSU Length180 mm
Dimensions17.05" x 9.02" x 19.96"
Weight19.40 lbs.
Package ContentMeshify 3 case
User manual
Accessory box
Přepravní hmotnost10.66 kg
Rozměry balení597 × 533 × 343 mm

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will a 349 mm graphics card fit with a 360 mm front radiator installed?

The case supports cards up to 349 mm and front radiators up to 360 mm, but simultaneous use at those maximums reduces clearance; check the combined length against the internal layout.

Does the 20 Gbps USB-C front port need a specific motherboard header?

Yes, it requires a USB 3.2 Gen 2x2 header on the motherboard to deliver the full 20 Gbps speed.

Can I mount two 3.5 inch drives and two 2.5 inch SSDs at the same time?

The tray behind the motherboard holds either two 3.5 inch drives or four 2.5 inch drives, while the floor adds two dedicated 2.5 inch slots, so mixing is possible.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.