Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two silver DDR4 sticks with aluminum heatspreaders side by side

G.SKILL

G.SKILL F4-2400C15D-16GVS Ripjaws V 16GB DDR4 desktop RAM

SKU CH-QXJ4-8TVTF MPN F4-2400C15D-16GVS

A 16 GB dual-channel DDR4 kit running at 2400 MT/s with CL15 timings and a 42 mm aluminium heatspreader for broad motherboard compatibility

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL15
  • Timing15-15-15-35
  • Voltage1.20V
  • 16 GB dual-channel capacity for smooth multitasking
  • DDR4 2400 speed with CL15 latency for responsive performance
  • Low 1.20 V voltage reduces power draw and heat
  • 42 mm module height clears most oversized CPU coolers
  • Intel XMP 2.0 profile enables one-click overclock setup

Ripjaws V DDR4 2400 Dual-Channel Kit

This G.SKILL Ripjaws V kit provides 16GB of DDR4 desktop memory in a matched pair of 8GB modules. It runs at 2400 MT/s with a CAS latency of 15 and operates at 1.20V. The aluminium heatspreader keeps modules cool during sustained workloads.

Suits Intel XMP 2.0 platforms

The kit is validated for Intel X99, X299, Z170 through Z690 DDR4 chipsets and AMD X570 or B550 motherboards. Builders using other chipsets or requiring ECC or registered DIMMs should look at different memory. Do not mix this kit with other modules.

42mm module height clears most oversized CPU coolers

Each stick measures 42mm tall, a dimension chosen to fit under large tower heatsinks without interference. This clearance is the key physical specification that determines whether the kit fits your cooler setup.

Přednosti

  • 16 GB dual-channel capacity for smooth multitasking
  • DDR4 2400 speed with CL15 latency for responsive performance
  • Low 1.20 V voltage reduces power draw and heat
  • 42 mm module height clears most oversized CPU coolers
  • Intel XMP 2.0 profile enables one-click overclock setup

Specifikace

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-2400C15D-16GVS
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL15
Timing15-15-15-35
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorSilver
Heat SpreaderYes
FeaturesOverclock performance DDR4 memory designed for compatible Intel platforms.
Sleek and stylish aluminum heatspreader design.
Intel XMP 2.0 support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the
Recommend UseAMD X570 / B550
Intel X99 / X299 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170
Přepravní hmotnost0.13 kg
Rozměry balení204 × 138 × 18 mm

Otázky k tomuto produktu

Will these two 8 GB modules run in dual-channel mode on my motherboard?

Yes, the kit is a matched dual-channel pair totalling 16 GB.

Is the 42 mm module height low enough to clear a large tower CPU cooler?

The 42 mm height is designed to fit under most oversized heatsinks.

Do I need to enable XMP 2.0 in the BIOS to reach the rated 2400 MT/s speed?

The modules default to JEDEC speeds; enabling the XMP 2.0 profile applies the 2400 MT/s, CL15, 1.20 V settings automatically.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.