Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four black DDR5 RDIMM modules with silver heatspreaders and gold contacts

G.SKILL

G.SKILL F5-6000R3036G32GQ4-ZR5NK 128GB (4 x 32GB) DDR5 6000 CL30 ECC Registered server RAM

SKU CH-3VFV-CDVWP MPN F5-6000R3036G32GQ4-ZR5NK

128 GB quad-channel DDR5 RDIMM kit running at 6000 MT/s with CL30 latency, ECC and registered buffering for AMD Threadripper workstations

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6000 (PC5 48000)
  • CAS LatencyCL30
  • Timing30-36-36-96
  • Voltage1.40V

Capacity 128GB (4 x 32GB)

Speed DDR5 6000 (PC5 48000)

  • High 6000 MT/s DDR5 speed for responsive workstation throughput
  • Tight CL30 30-36-36-96 timings reduce latency in compute tasks
  • ECC Registered design protects data integrity on critical workloads
  • 128 GB quad-channel kit scales memory bandwidth for Threadripper 7000X systems
  • AMD EXPO support simplifies one-click overclock setup on TRX50 platforms

128GB DDR5 6000 ECC RDIMM Kit

This 128GB kit contains four 32GB DDR5 6000 RDIMM modules. It is built for workstations that require registered ECC memory with AMD EXPO support. The CL30 timing and 1.40V voltage target high stability under load. It suits professionals running memory-intensive workloads on supported AMD platforms.

Registered ECC With CL30 Timing

The modules operate as DDR5 6000 RDIMM with CAS latency 30 and timings of 30-36-36-96. Registered buffering and on-die ECC protect data integrity in critical applications. This specification determines compatibility with motherboards that accept registered DDR5 at this speed and latency. Buyers needing unbuffered or non-ECC memory cannot use this kit.

Quad-Channel Kit For AMD TRX50 Platforms

The four-module kit populates a quad-channel configuration on compatible AMD TRX50 motherboards. It is designed for Ryzen Threadripper 7000X series processors that support AMD EXPO profiles. The 288-pin RDIMM form factor requires a workstation board with registered DDR5 slots. Builders using consumer chipsets or unbuffered memory slots will find this kit incompatible.

Přednosti

  • High 6000 MT/s DDR5 speed for responsive workstation throughput
  • Tight CL30 30-36-36-96 timings reduce latency in compute tasks
  • ECC Registered design protects data integrity on critical workloads
  • 128 GB quad-channel kit scales memory bandwidth for Threadripper 7000X systems
  • AMD EXPO support simplifies one-click overclock setup on TRX50 platforms

Specifikace

BrandG.SKILL
SeriesZeta R5 Neo series
ModelF5-6000R3036G32GQ4-ZR5NK
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6000 (PC5 48000)
CAS LatencyCL30
Timing30-36-36-96
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Multi-channel KitQuad Channel Kit
FeaturesZeta R5 Neo series memory kits are overclocked performance DDR5 R-DIMM memory designed
for use with compatible AMD workstation systems. Featuring AMD EXPO and ECC support, the
Zeta R5 Neo series is the ultimate overclocked performance memory solution for high-end
workstation platforms.
• Overclock performance DDR5 RDIMM memory kit
• Designed for use with AMD Ryzen Threadripper 7000X series processor
• Requires compatible AMD TRX50 motherboard w/ 4-channel support
• On-die ECC & side-band ECC
• Dedicated temperature sensors
• AMD EXPO Support
Přepravní hmotnost0.23 kg
Rozměry balení244 × 178 × 25 mm

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What does DDR5 6000 (PC5 48000) mean for actual throughput in a workstation?

The kit runs at 6000 MT/s, giving a peak bandwidth of 48 GB/s per module when the platform enables the rated speed.

How does AMD EXPO work with this registered ECC kit?

The modules carry an EXPO profile that sets 6000 MT/s, CL30-36-36-96 at 1.40 V on compatible TRX50 motherboards with Ryzen Threadripper 7000X series CPUs.

Will these 288-pin RDIMMs fit my motherboard's memory slots?

They require a TRX50 board with four DDR5 RDIMM slots; the 288-pin form factor is keyed for registered DDR5 only.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.