Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four silver DDR5 RDIMMs with black heat spreaders, 48GB each

G.SKILL

G.SKILL F5-6400R3239G48GQ4-ZR5NK 192GB (4 x 48GB) DDR5 6400 CL32 ECC Registered server RAM

SKU CH-6EK4-X4DXB MPN F5-6400R3239G48GQ4-ZR5NK

A 192 GB quad-channel DDR5 RDIMM kit running at 6400 MT/s with CL32 latency, ECC and AMD EXPO support for Threadripper workstations

  • Capacity192GB (4 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL32
  • Timing32-39-39
  • Voltage1.40V

Capacity 192GB (4 x 48GB)

Speed DDR5 6400 (PC5 51200)

  • 192 GB quad-channel capacity scales workstation memory headroom
  • DDR5 6400 CL32 timing delivers high-throughput registered performance
  • ECC registered design protects data integrity under sustained loads
  • AMD EXPO profile enables one-click overclock tuning on Threadripper 7000
  • On-die and side-band ECC plus thermal sensors enhance reliability

192GB quad-channel DDR5 RDIMM kit

This 192GB kit contains four 48GB registered DDR5 modules rated at 6400 MT/s with CL32-39-39 timings at 1.40V. On-die and side-band ECC protect data integrity for professional workloads. The modules target AMD workstation platforms that accept registered memory.

Requires TRX50 motherboard with four-channel support

Installation demands a compatible AMD TRX50 motherboard that enables quad-channel operation for the full 192GB capacity. The registered design reduces electrical load on the memory controller, allowing dense population. AMD EXPO profiles simplify configuration on supported firmware.

Sustained operation monitored by on-module sensors

Dedicated temperature sensors on each module provide thermal feedback during extended compute tasks. The 1.40V operating voltage and registered buffering help maintain signal stability across all four channels under continuous load. ECC correction runs transparently throughout long sessions.

Přednosti

  • 192 GB quad-channel capacity scales workstation memory headroom
  • DDR5 6400 CL32 timing delivers high-throughput registered performance
  • ECC registered design protects data integrity under sustained loads
  • AMD EXPO profile enables one-click overclock tuning on Threadripper 7000
  • On-die and side-band ECC plus thermal sensors enhance reliability

Specifikace

BrandG.SKILL
SeriesZeta R5 Neo series
ModelF5-6400R3239G48GQ4-ZR5NK
Capacity192GB (4 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL32
Timing32-39-39
Voltage1.40V
ECCYes
Buffered/RegisteredRegistered
Multi-channel KitQuad Channel Kit
FeaturesZeta R5 Neo series memory kits are overclocked performance DDR5 R-DIMM memory designed
for use with compatible AMD workstation systems. Featuring AMD EXPO and ECC support, the
Zeta R5 Neo series is the ultimate overclocked performance memory solution for high-end
workstation platforms.
• Overclock performance DDR5 RDIMM memory kit
• Designed for use with AMD Ryzen Threadripper 7000X series processor
• Requires compatible AMD TRX50 motherboard w/ 4-channel support
• On-die ECC & side-band ECC
• Dedicated temperature sensors
• AMD EXPO Support
Přepravní hmotnost0.23 kg
Rozměry balení244 × 178 × 24 mm

Další verze tohoto modelu

Dalších 4 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the CL32 latency hold under sustained heavy workloads?

The kit is rated CL32-39-39 at DDR5 6400 with 1.40 V; those timings are the guaranteed specification for continuous operation.

How much heat and power should I expect from four 48 GB modules running all day?

Each RDIMM operates at 1.40 V; total power draw and thermals depend on your chassis airflow and CPU load, but the modules include dedicated temperature sensors for monitoring.

Which motherboard and CPU combination is required for this quad-channel kit to function?

It requires a compatible AMD TRX50 motherboard with four-channel support and a Ryzen Threadripper 7000X series processor to enable AMD EXPO and ECC features.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.