Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Dual-fan graphics card with silver backplate and black shroud

GIGABYTE

GIGABYTE GV-N2060WF2OC-6GD GeForce RTX 2060 WINDFORCE OC 6GB graphics card

SKU CH-K3P5-0YPEV MPN GV-N2060WF2OC-6GD

Refurbished GeForce RTX 2060 with 6GB GDDR6 memory, 1920 CUDA cores at 1770 MHz, WINDFORCE 2X dual-fan cooling, and four display outputs for 7680 x 4320 resolution

  • InterfacePCI Express 3.0 x16
  • Chipset ManufacturerNVIDIA
  • GPU SeriesNVIDIA GeForce RTX 20 Series
  • GPUGeForce RTX 2060
  • Core Clock1770 MHz
  • CUDA Cores1920
  • 6 GB GDDR6 memory delivers high-bandwidth performance for 1440p gaming
  • WINDFORCE 2X dual-fan cooler with alternate spinning keeps temperatures low under load
  • Factory overclock to 1770 MHz boosts frame rates out of the box
  • 1920 CUDA cores accelerate rendering and compute workloads
  • Four display outputs (HDMI 2.0b plus three DisplayPort 1.4) drive multi-monitor setups up to 7680 × 4320

Refurbished RTX 2060 with 6GB GDDR6

This refurbished GIGABYTE GeForce RTX 2060 WINDFORCE OC graphics card delivers 1920 CUDA cores and a 1770 MHz boost clock. The 6GB GDDR6 memory runs on a 192-bit bus at 14000 MHz effective speed. It connects via PCI Express 3.0 x16 and fits a dual-slot ATX form factor.

Suitable for 1080p gaming and VR.

The card supports DirectX 12 and OpenGL 4.5 for modern titles at high refresh rates. Virtual Reality Ready certification covers headset use. Four display outputs (one HDMI 2.0b, three DisplayPort 1.4) drive up to four monitors at 7680 x 4320 @ 60 Hz. SLI is not supported, so multi-GPU scaling is unavailable.

160W TDP requires a 500W PSU and one 8-pin connector

The board draws up to 160W and needs a single 8-pin PCIe power cable. WINDFORCE 2X cooling uses alternate-spinning 100mm fans and a protection back plate. Physical length is 265 mm, so verify case clearance before purchase.

Přednosti

  • 6 GB GDDR6 memory delivers high-bandwidth performance for 1440p gaming
  • WINDFORCE 2X dual-fan cooler with alternate spinning keeps temperatures low under load
  • Factory overclock to 1770 MHz boosts frame rates out of the box
  • 1920 CUDA cores accelerate rendering and compute workloads
  • Four display outputs (HDMI 2.0b plus three DisplayPort 1.4) drive multi-monitor setups up to 7680 × 4320

Specifikace

BrandGIGABYTE
ModelGV-N2060WF2OC-6GD
InterfacePCI Express 3.0 x16
Chipset ManufacturerNVIDIA
GPU SeriesNVIDIA GeForce RTX 20 Series
GPUGeForce RTX 2060
Core Clock1770 MHz
CUDA Cores1920
Effective Memory Clock14000 MHz
Memory Size6GB
Memory Interface192-Bit
Memory TypeGDDR6
DirectXDirectX 12
OpenGLOpenGL 4.5
Multi-Monitor Support4
HDMI1 x HDMI 2.0b
DisplayPort3 x DisplayPort 1.4
Max Resolution7680 x 4320 @ 60 Hz
SLI SupportNo
Virtual Reality ReadyYes
CoolerWINDFORCE 2X
Thermal Design Power160W
System RequirementsSystem PSU Limitation (W): 500
Power Connector8-Pin
FeaturesPowered by GeForce RTX 2060
Integrated with 6GB GDDR6 192-bit memory interface
WINDFORCE 2X Cooling System with alternate spinning fans
100mm unique blade fans
Protection back plate
Form FactorATX
Max GPU Length265 mm
Card Dimensions (L x H)10.43" x 4.75"
Slot Width2 Slots
Přepravní hmotnost1.02 kg
Rozměry balení330 × 239 × 61 mm

Otázky k tomuto produktu

Will the 265 mm long, dual-slot card fit in my ATX case?

The card measures 265 mm long and occupies two slots, so verify your case has at least that much clearance and a free dual-slot opening.

How do I connect the 8-pin power plug and what mistake should I avoid?

Plug a single 8-pin PCIe cable from a 500 W or larger PSU directly into the card; do not use a daisy-chained adapter or split connector.

When should I clean or replace the WINDFORCE 2X cooler's 100 mm fans?

Blow dust from the two 100 mm fans every few months; replace them only if they become noisy or stop spinning.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.