Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two black SAS to SATA adapter cables with 29-pin and 22-pin connectors

HANNORD

HANNORD SAS to SATA Adapter 2 Pack SFF-8482 29Pin to 22Pin

SKU CH-TAX3-TJTP8

Converts a 29-pin SAS drive to a 22-pin SATA motherboard port, passing 6 Gbps data and 12 V plus 5 V power for 2.5 and 3.5 inch disks

  • Changer TypeSATA

Model 2 Pack

  • SAS to SATA connectivity via SFF-8482 29Pin to 22Pin adapter
  • 6 Gbps data transfer with 12V and 5V power delivery
  • Supports 2.5 inch and 3.5 inch SATA drives
  • Male to female 22Pin 7+15 extension for flexible installation
  • Includes screw holes for secure mounting in chassis

SAS to SATA adapter pair

This pack contains two HANNORD adapters that convert a 29-pin SFF-8482 SAS connector to a standard 22-pin SATA interface. Each adapter carries both 12 V and 5 V power lines together with 6 Gbps data signals. The connectors are male on one end and female on the other, and screw holes are provided for secure mounting.

Who should use these

Builders connecting SAS hard drives to a SATA motherboard or backplane will find the required pin-out change and power routing in one compact unit. The adapters support both 2.5" and 3.5" SATA disks, so they suit mixed drive bays. Systems that need a direct SAS-to-SAS link or a different pin count cannot use this converter.

Deciding specification

The critical figure is the 29-pin SFF-8482 to 22-pin SATA translation, which determines whether your drive and host connectors match. If the drive presents a 29-pin SAS plug and the host expects a 22-pin SATA receptacle, this adapter bridges the gap.

Přednosti

  • SAS to SATA connectivity via SFF-8482 29Pin to 22Pin adapter
  • 6 Gbps data transfer with 12V and 5V power delivery
  • Supports 2.5 inch and 3.5 inch SATA drives
  • Male to female 22Pin 7+15 extension for flexible installation
  • Includes screw holes for secure mounting in chassis

Specifikace

Changer TypeSATA

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What motherboard connector must I have free to plug in the SFF-8482 29-pin end of this adapter?

You need an available SAS SFF-8482 29-pin port on the motherboard or controller card.

Can I keep using my existing 2.5-inch and 3.5-inch SATA drives with these adapters?

Yes, the SATA 22-pin 7+15 female end accepts both 2.5-inch and 3.5-inch SATA drives directly.

How can I verify the 6Gbps data rate is active after connecting a drive?

Check the negotiated link speed in your BIOS or OS disk utility; it should show 6 Gb/s for the attached drive.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.