HANNORD
HANNORD SAS to SATA Adapter 2 Pack SFF-8482 29Pin to 22Pin
Converts a 29-pin SAS drive to a 22-pin SATA motherboard port, passing 6 Gbps data and 12 V plus 5 V power for 2.5 and 3.5 inch disks
- Changer TypeSATA
Model 2 Pack
- 2 Pack
- 1 Pack
- SAS to SATA connectivity via SFF-8482 29Pin to 22Pin adapter
- 6 Gbps data transfer with 12V and 5V power delivery
- Supports 2.5 inch and 3.5 inch SATA drives
- Male to female 22Pin 7+15 extension for flexible installation
- Includes screw holes for secure mounting in chassis
SAS to SATA adapter pair
This pack contains two HANNORD adapters that convert a 29-pin SFF-8482 SAS connector to a standard 22-pin SATA interface. Each adapter carries both 12 V and 5 V power lines together with 6 Gbps data signals. The connectors are male on one end and female on the other, and screw holes are provided for secure mounting.
Who should use these
Builders connecting SAS hard drives to a SATA motherboard or backplane will find the required pin-out change and power routing in one compact unit. The adapters support both 2.5" and 3.5" SATA disks, so they suit mixed drive bays. Systems that need a direct SAS-to-SAS link or a different pin count cannot use this converter.
Deciding specification
The critical figure is the 29-pin SFF-8482 to 22-pin SATA translation, which determines whether your drive and host connectors match. If the drive presents a 29-pin SAS plug and the host expects a 22-pin SATA receptacle, this adapter bridges the gap.
商品特色
- SAS to SATA connectivity via SFF-8482 29Pin to 22Pin adapter
- 6 Gbps data transfer with 12V and 5V power delivery
- Supports 2.5 inch and 3.5 inch SATA drives
- Male to female 22Pin 7+15 extension for flexible installation
- Includes screw holes for secure mounting in chassis
商品規格
| Changer Type | SATA |
|---|
其他版本
同系列還有 1 款
同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。
商品問答
What motherboard connector must I have free to plug in the SFF-8482 29-pin end of this adapter?
You need an available SAS SFF-8482 29-pin port on the motherboard or controller card.
Can I keep using my existing 2.5-inch and 3.5-inch SATA drives with these adapters?
Yes, the SATA 22-pin 7+15 female end accepts both 2.5-inch and 3.5-inch SATA drives directly.
How can I verify the 6Gbps data rate is active after connecting a drive?
Check the negotiated link speed in your BIOS or OS disk utility; it should show 6 Gb/s for the attached drive.
同類商品
顧客也比較過
同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics




