Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 1U rack server with eight front 2.5 inch drive bays

HPE

HPE ProLiant DL360 Gen9 8SFF rack server 1x Xeon E5-2660v3 2.6GHz 10C 384GB DDR4 no drive

SKU CH-D4DK-7AF2Q

A 1U rack server with eight 2.5-inch drive bays, one 10-core Xeon at 2.6 GHz and 384 GB DDR4 ECC memory, ready for storage and RAID configuration

  • TypeRack
  • CPU TypeIntel Xeon
  • CPU Speed2.6GHz
  • # of Processors Installed1
  • MAX Processors2
  • Installed Memory Size384GB
  • 10-core Xeon E5-2660v3 at 2.6GHz for compute density
  • 384GB DDR4 ECC registered memory supports large workloads
  • 8 SFF bays with P440 SAS controller enable flexible storage
  • Dual 10GbE plus dual 1GbE ports for high-throughput networking
  • Dual 500W Flex Slot supplies provide redundant power

HPE ProLiant DL360 Gen9 8SFF server

The HPE ProLiant DL360 Gen9 8SFF rack server arrives with one Xeon E5-2660v3 processor running at 2.6 GHz and ten cores. It is built for organisations that need dense compute in a 1U form factor and prefer to choose their own storage drives. The system includes integrated graphics and remote management through HPE iLO Advanced.

384 GB DDR4 memory with 768 GB ceiling

Installed memory totals 384 GB of DDR4 ECC registered DIMMs, leaving headroom to reach the 768 GB maximum when a second processor is added. The Smart Array P440 SAS controller manages up to eight 2.5-inch drive bays, so capacity scales with the drives you select. Memory bandwidth grows with the second CPU, while the single-socket configuration caps peak throughput at the single-processor limit.

Dual 500 W supplies and quad-port networking

Two 500 W Flex Slot power supplies provide redundancy from day one. A factory-installed network card delivers two 10 GbE ports and two 1 GbE ports for flexible uplink topologies. Rails are available on request, and every unit ships with BIOS and firmware updated to the latest stable release after full burn-in testing.

Přednosti

  • 10-core Xeon E5-2660v3 at 2.6GHz for compute density
  • 384GB DDR4 ECC registered memory supports large workloads
  • 8 SFF bays with P440 SAS controller enable flexible storage
  • Dual 10GbE plus dual 1GbE ports for high-throughput networking
  • Dual 500W Flex Slot supplies provide redundant power

Specifikace

BrandHP
SeriesProLiant
ModelRack Mount
TypeRack
CPU TypeIntel Xeon
CPU Speed2.6GHz
# of Processors Installed1
MAX Processors2
Installed Memory Size384GB
Memory TypeDDR4
Max Memory Capacity768GB
Hard Drive (Installed)4,80
Storage ControllerHPE Smart Array P440 SAS Controller
HDD InterfaceSAS
GPU TypeIntegrated Graphics
Remote ManagementHPE iLO Advanced
Dimensions36 x 24 x 10 in
Weight40

Otázky k tomuto produktu

Will the P440 controller work with my existing SAS drives?

The P440 PCIe SAS controller supports SAS drives in the eight 2.5-inch bays, allowing you to reuse compatible drives you already own.

How can I confirm the iLO remote management is active after installation?

Connect the dedicated iLO port, power on the server, and access the iLO web interface using the address shown on the POST screen to verify remote management is functioning.

Which components are included and which must be purchased separately?

The server ships with one Xeon E5-2660v3 processor, 384GB DDR4 ECC registered memory, P440 SAS controller, dual 500W power supplies, and 10GbE/1GbE network card; drives and rail kit are not included.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.