HPE
HPE ProLiant DL360 Gen9 8SFF rack server 1x Xeon E5-2660v3 2.6GHz 10C 384GB DDR4 no drive
A 1U rack server with eight 2.5-inch drive bays, one 10-core Xeon at 2.6 GHz and 384 GB DDR4 ECC memory, ready for storage and RAID configuration
- TypeRack
- CPU TypeIntel Xeon
- CPU Speed2.6GHz
- # of Processors Installed1
- MAX Processors2
- Installed Memory Size384GB
- 10-core Xeon E5-2660v3 at 2.6GHz for compute density
- 384GB DDR4 ECC registered memory supports large workloads
- 8 SFF bays with P440 SAS controller enable flexible storage
- Dual 10GbE plus dual 1GbE ports for high-throughput networking
- Dual 500W Flex Slot supplies provide redundant power
HPE ProLiant DL360 Gen9 8SFF server
The HPE ProLiant DL360 Gen9 8SFF rack server arrives with one Xeon E5-2660v3 processor running at 2.6 GHz and ten cores. It is built for organisations that need dense compute in a 1U form factor and prefer to choose their own storage drives. The system includes integrated graphics and remote management through HPE iLO Advanced.
384 GB DDR4 memory with 768 GB ceiling
Installed memory totals 384 GB of DDR4 ECC registered DIMMs, leaving headroom to reach the 768 GB maximum when a second processor is added. The Smart Array P440 SAS controller manages up to eight 2.5-inch drive bays, so capacity scales with the drives you select. Memory bandwidth grows with the second CPU, while the single-socket configuration caps peak throughput at the single-processor limit.
Dual 500 W supplies and quad-port networking
Two 500 W Flex Slot power supplies provide redundancy from day one. A factory-installed network card delivers two 10 GbE ports and two 1 GbE ports for flexible uplink topologies. Rails are available on request, and every unit ships with BIOS and firmware updated to the latest stable release after full burn-in testing.
Points forts
- 10-core Xeon E5-2660v3 at 2.6GHz for compute density
- 384GB DDR4 ECC registered memory supports large workloads
- 8 SFF bays with P440 SAS controller enable flexible storage
- Dual 10GbE plus dual 1GbE ports for high-throughput networking
- Dual 500W Flex Slot supplies provide redundant power
Caractéristiques
| Brand | HP |
|---|---|
| Series | ProLiant |
| Model | Rack Mount |
| Type | Rack |
| CPU Type | Intel Xeon |
| CPU Speed | 2.6GHz |
| # of Processors Installed | 1 |
| MAX Processors | 2 |
| Installed Memory Size | 384GB |
| Memory Type | DDR4 |
| Max Memory Capacity | 768GB |
| Hard Drive (Installed) | 4,80 |
| Storage Controller | HPE Smart Array P440 SAS Controller |
| HDD Interface | SAS |
| GPU Type | Integrated Graphics |
| Remote Management | HPE iLO Advanced |
| Dimensions | 36 x 24 x 10 in |
| Weight | 40 |
Questions sur cet article
Will the P440 controller work with my existing SAS drives?
The P440 PCIe SAS controller supports SAS drives in the eight 2.5-inch bays, allowing you to reuse compatible drives you already own.
How can I confirm the iLO remote management is active after installation?
Connect the dedicated iLO port, power on the server, and access the iLO web interface using the address shown on the POST screen to verify remote management is functioning.
Which components are included and which must be purchased separately?
The server ships with one Xeon E5-2660v3 processor, 384GB DDR4 ECC registered memory, P440 SAS controller, dual 500W power supplies, and 10GbE/1GbE network card; drives and rail kit are not included.
Également dans ce rayon
Les clients ont aussi comparé
Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.



