HUADISK
HUADISK HYV2TBX4(GR) 2TB M.2 2280 PCIe 4.0 x4 internal SSD
- Internal Solid Stat…
- Consumer
187,99 US$
0.0023613BTC
Skladem
HUADISK
HUADISK HYV1TBX4(GR) 1TB internal SSD
1 TB M.2 2280 PCIe 4.0 x4 drive with 7200 MB/s read, 6400 MB/s write and 600 TBW endurance
- Max Sequential ReadUp to 7200 MBps
- Max Sequential WriteUp to 6400 MBps
- 4KB Random ReadUp to 720,000 IOPS
- 4KB Random WriteUp to 800,000 IOPS
- Terabytes Written (TBW)600TB
- MTBF1,000,000 hours
Capacity 1TB
- 1TB
- 2TB
- Up to 7200 MBps sequential read for rapid file loading
- Up to 6400 MBps sequential write for fast data saving
- 720,000 IOPS random read keeps multitasking responsive
- 800,000 IOPS random write handles heavy workloads smoothly
- 600 TBW and 1,000,000 hours MTBF indicate long-term endurance
1TB PCIe 4.0 NVMe drive
This HUADISK model is a 1TB M.2 2280 internal SSD built on the NVMe 1.4 protocol and a PCIe 4.0 x4 interface. It is designed for consumer desktops, laptops and the PS5 where a heatsink-less module is required for tight clearances. The 80.0mm length and 2.10mm thickness allow installation in ultra-thin chassis.
Thermals noise and power
Without an attached heatsink the drive relies on system airflow and operates within a 0°C to 70°C range. Active power draw is 8.18W while idle consumption sits at 0.66W. The slim profile produces no mechanical noise and fits alongside other components without blocking ventilation paths.
Sustained load behaviour
Sequential reads reach up to 7200 MBps and writes up to 6400 MBps during extended transfers. Random performance holds at 720000 IOPS read and 800000 IOPS write under continuous multi-threaded workloads. Endurance is rated at 600TB written with a 1000000 hour MTBF for long-term reliability.
Přednosti
- Up to 7200 MBps sequential read for rapid file loading
- Up to 6400 MBps sequential write for fast data saving
- 720,000 IOPS random read keeps multitasking responsive
- 800,000 IOPS random write handles heavy workloads smoothly
- 600 TBW and 1,000,000 hours MTBF indicate long-term endurance
Specifikace
| Max Sequential Read | Up to 7200 MBps |
|---|---|
| Max Sequential Write | Up to 6400 MBps |
| 4KB Random Read | Up to 720,000 IOPS |
| 4KB Random Write | Up to 800,000 IOPS |
| Terabytes Written (TBW) | 600TB |
| MTBF | 1,000,000 hours |
| HeatSink | without HeatSink |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Interface | PCI-Express 4.0 x4 |
| Protocol | NVMe 1.4 |
| Power Consumption (Active) | 8.18W |
| Power Consumption (Idle) | 0.66W |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -20°C ~ +75°C |
| Operating Humidity | 5-95% |
| Brand | HUADISK |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Height | 80.0mm |
| Width | 22.0mm |
| Depth | 2.10mm |
| Weight | 30g |
| Přepravní hmotnost | 0.05 kg |
| Rozměry balení | 98 × 60 × 15 mm |
Další verze tohoto modelu
Dalších 1 v této řadě
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Otázky k tomuto produktu
How do I install this M.2 2280 SSD and what step do people often miss?
Insert the drive at an angle into the PCIe 4.0 x4 slot, press it flat, and secure it with the motherboard screw; the step many miss is enabling the NVMe 1.4 drive in BIOS so the OS can see it.
What maintenance or replacement will this 1 TB drive need later?
No routine maintenance is required; the 600 TBW endurance rating and 1 000 000 hour MTBF indicate when the NAND may wear out, at which point the drive would be replaced.
What limit appears first during sustained heavy writes on this drive?
The 8.18 W active power draw and lack of a heatsink mean the controller will hit the 70 °C operating ceiling first, triggering thermal throttling to protect the 3D NAND.
Také v této kategorii
Zákazníci také porovnávali
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
