Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver metal enclosure with four open drive bays and a cooling fan

ICY DOCK

ICY DOCK flexiDOCK MB014SP-B R1 4 Bay 2.5" SATA/SAS Hot-Swap Docking Enclosure for 5.25" Bay

SKU CH-SRRZ-DS7N9

Hot-swap four 2.5″ SATA/SAS drives in a 5.25″ bay with tray-less ejection and a 40 mm fan

  • Holds four 2.5" SATA or SAS drives in one 5.25" bay
  • Tray-less design allows tool-free hot-swap of bare drives
  • Individual power buttons and improved ejection mechanism per bay
  • Adjustable 40 mm fan with on/off jumper for thermal control
  • Locking SATA cables and full metal chassis ensure secure connections

4-Bay 2.5" SATA/SAS Hot-Swap Dock

This enclosure fits a standard 5.25" optical drive bay and holds four 2.5" SATA or SAS drives between 5 mm and 9.5 mm thick. A self-adjusting stabilizer secures 7 mm drives, while the tray-less, door-less design lets you insert or remove bare drives without tools. It targets professionals who swap multiple drives frequently and need quick, direct access.

Check 5.25" bay availability and host interface

Verify that your chassis has a free external 5.25" bay and that your motherboard or controller provides enough SATA 3.0 6Gbps or SAS 3.0 12Gbps ports for the number of drives you plan to use. A SAS host is required for SAS drives; SATA drives work on either interface. Ensure you have matching data and power cables with locking latches for secure connections.

Sustained thermal management under load

A 40 mm fan with adjustable speed control and an on/off jumper actively cools all four bays during extended operation. The full metal chassis and industrial ABS plastic dissipate heat while protecting drives during continuous read/write cycles. Individual power buttons let you spin down unused drives, reducing overall thermal load without removing them.

Přednosti

  • Holds four 2.5" SATA or SAS drives in one 5.25" bay
  • Tray-less design allows tool-free hot-swap of bare drives
  • Individual power buttons and improved ejection mechanism per bay
  • Adjustable 40 mm fan with on/off jumper for thermal control
  • Locking SATA cables and full metal chassis ensure secure connections

Specifikace

Pro tento produkt zatím nejsou zveřejněny žádné specifikace.

Otázky k tomuto produktu

Does the flexiDOCK MB014SP-B R1 include the four 2.5" SATA/SAS drives or must they be purchased separately?

The enclosure holds four 2.5" SATA or SAS SSDs or HDDs from 5 mm to 9.5 mm thick; drives are not included and must be supplied by the user.

Should I choose the SATA 3.0 6 Gbps or the SAS 3.0 12 Gbps interface for my system?

Use SATA 3.0 6 Gbps with a standard SATA controller; choose SAS 3.0 12 Gbps only if your host has a single-channel SAS controller that can address all four bays.

What does the 12 Gbps SAS figure mean once the unit is installed in a 5.25" bay?

Each bay can transfer at up to 12 Gbps when driven by a compatible SAS host, but the actual throughput will match the slowest link in your controller, cables and drives.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.