Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black USB 3.0 to SATA IDE adapter with Type C port and 12V power supply

Jansicotek

Jansicotek E02 USB 3.0 to SATA/IDE Type C adapter with 12V power for 6TB

SKU CH-8GKS-RJBBJ

Connects 2.5" or 3.5" SATA and IDE drives to USB 3.0 or Type-C with 12 V power for up to 6 TB

  • ColorBlack
  • Changer TypeUSB to IDE&SATA
  • SpecificationsAll in One Solution to Connect to Different Types of Interfa
  • Package ContentsAll in One Solution to Connect to Different Types of Interfa
  • Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0 or Type C
  • Transfer data at up to 5Gb/s, ten times faster than USB 2.0
  • Use drives up to 6TB capacity with included 12V power adapter
  • Works with Windows, Mac, Linux and Chrome OS without installing drivers
  • Also reads DVD, CD and RW optical drives through the same adapter

Universal drive adapter for 6 TB IDE and SATA

The Jansicotek E02 connects 2.5 and 3.5 inch SATA or IDE hard drives and optical drives to a USB 3.0 or Type-C port. It suits technicians, archivists and home users who need quick access to bare drives without an enclosure. Compatible with Windows, Mac OS, Linux and Chrome OS, it requires no driver installation. The adapter handles drives up to 6 TB capacity.

Thermals noise and power in daily use

The unit draws power from the included 12 V supply for 3.5 inch drives while 2.5 inch models run from the USB bus. No active cooling is present so operation stays silent. USB 3.0 delivers up to 5 Gb/s and remains backward compatible with USB 2.0 and 1.1 ports. LED indicators show power and activity status at a glance.

Bundled accessories and software impact

A 12 V power adapter and necessary cables ship in the box so 3.5 inch drives work immediately. UASP support accelerates transfers on compatible hosts without extra software. The plug-and-play design eliminates driver setup across all supported operating systems. Compact construction lets the kit travel in a laptop bag for on-site recovery tasks.

Přednosti

  • Connect 2.5 or 3.5 inch SATA and IDE drives via USB 3.0 or Type C
  • Transfer data at up to 5Gb/s, ten times faster than USB 2.0
  • Use drives up to 6TB capacity with included 12V power adapter
  • Works with Windows, Mac, Linux and Chrome OS without installing drivers
  • Also reads DVD, CD and RW optical drives through the same adapter

Specifikace

BrandJansicotek
ModelE02
ColorBlack
Changer TypeUSB to IDE&SATA
SpecificationsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Supports drives with a capacity
Package ContentsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
No Drive Needed for Windows, Mac and Linux, Chrome
the included external power adapter will allow you to power your drives outside without opening your case. the plug and play function with no driving need, features works wonder with Windows and OSX saving your time and trouble,

Otázky k tomuto produktu

How do I install the E02 adapter and connect a 3.5 inch SATA drive?

Connect the SATA data cable to the drive, attach the 12V power adapter to the drive's power port, then plug the adapter into a USB 3.0 port. The step often missed is applying 12V power before the USB link for 3.5 inch drives.

What maintenance or replacement will the included 12V power adapter need later?

The 12V power adapter is a consumable component; replace it if the barrel connector loosens, the cable frays, or the brick no longer delivers stable voltage to 3.5 inch drives.

What limit appears first during sustained transfers with a 6TB drive?

The USB 3.0 interface caps sustained throughput at 5Gb/s, so large sequential copies on a 6TB drive will hit that bandwidth ceiling before the drive's own speed limit.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.