Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black USB-C adapter block with SATA and dual IDE ports plus 12V power supply

Jansicotek

Jansicotek E02 USB-C to SATA IDE adapter kit 2.5/3.5 inch

SKU CH-H71P-XFV55

Connects 2.5 or 3.5 inch SATA and IDE drives to USB 3.0 with included 12V power adapter

  • ColorBlack
  • Changer TypeUSB to IDE&SATA
  • SpecificationsAll in One Solution to Connect to Different Types of Interfa
  • Package ContentsAll in One Solution to Connect to Different Types of Interfa
  • Connect 2.5 and 3.5 inch SATA or IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with UASP acceleration
  • Works with Windows, Mac OS and Linux without extra drivers
  • Includes 12 V 2 A power adapter for 3.5 inch drives
  • Dual IDE connectors 40 pin and 44 pin plus SATA II port

Universal 2.5 and 3.5 inch drive adapter

The Jansicotek E02 kit connects standard SATA and IDE hard drives or optical drives to a computer through a USB 3.0 port. It includes a 12V/2A power adapter, dual-head IDE connectors for 40pin and 44pin devices, and a SATA II connector. The compact black unit supports hot-swapping and plug-and-play operation across multiple operating systems.

Suits users with bare legacy drives

This adapter suits anyone needing to access data from older 2.5in or 3.5in SATA or IDE drives without installing them internally. It also works with DVD-ROM, CD-ROM, CD-RW, and DVD-RW drives. It is not for builders who require an internal mounting solution, a drive enclosure, or a dock with additional ports beyond the single USB connection.

Check your host port and drive power

Verify your computer has an available USB 3.0 Type-A port for full 5 Gbps speed, though the adapter is backward compatible with USB 2.0 and 1.1. For 3.5in IDE hard drives, the included 4-pin power cable must be connected to the 12V/2A power supply. Ensure the target drive uses a standard SATA or 40/44pin IDE interface before ordering.

Přednosti

  • Connect 2.5 and 3.5 inch SATA or IDE drives via USB 3.0
  • Transfer data at up to 5 Gbps with UASP acceleration
  • Works with Windows, Mac OS and Linux without extra drivers
  • Includes 12 V 2 A power adapter for 3.5 inch drives
  • Dual IDE connectors 40 pin and 44 pin plus SATA II port

Specifikace

BrandJansicotek
ModelE02
ColorBlack
Changer TypeUSB to IDE&SATA
SpecificationsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
Supported Drives: 2.5"/3.5" SATA HDD/SSD; 2.5"/3.5" IDE HDD; DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW.
Compatible with Windows 10/8/8.1/7/Vista/XP and Mac OS, Linux, and Chrome OS etc.
Data Transfer Rate: up to 5Gb/s (10 times faster than USB 2.0).
Supports drives with a capacity
Package ContentsAll in One Solution to Connect to Different Types of Interface's Hard Drive
This USB 3.0 to SATA IDE Adapter connects any standard 2.5in or 3.5in SATA or IDE hard drive to a computer through an available USB 3.0 port, also supported DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW; Backward compatible with USB 2.0/1.1.
No Drive Needed for Windows, Mac and Linux, Chrome
the included external power adapter will allow you to power your drives outside without opening your case. the plug and play function with no driving need, features works wonder with Windows and OSX saving your time and trouble,

Otázky k tomuto produktu

Do I need a USB 3.0 port on my computer to use the E02 adapter?

The adapter connects through a USB 3.0 port and is backward compatible with USB 2.0 and 1.1 ports.

Will the E02 adapter work with my 3.5 inch IDE hard drive that uses a 40-pin connector?

Yes, the kit includes a dual-head IDE connector with both 40-pin and 44-pin interfaces for 3.5 inch and 2.5 inch IDE drives.

How can I confirm the adapter is powered and transferring data after I connect a drive?

The built-in LED indicator shows power and activity status so you can see when the drive is working.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.