Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Gray mid-tower ATX case with tempered glass panels and skeletal frame design

JONSBO

JONSBO X400 GRAY ATX PC Case

SKU CH-BNTX-BGKB9

Gray mid-tower case supports ATX back-connect motherboards, 427 mm GPU, 360 mm side radiator and 13 fan positions

  • Motherboard CompatibilityMicro ATX / ATX / ITX
  • ColorGray
  • Case MaterialABS / SPCC / Tempered Glass
  • TypeMicro ATX / ATX / ITX
  • Dust FiltersYes
  • Front PortsUSB 3.2 Gen 1 Type-A: 2/ USB 3.2 Gen 2 Type-C: 1 ‌TRRS x 1
  • Back-connect motherboard support keeps internal cabling tidy
  • 13 fan positions plus side 360 mm radiator room enable high airflow cooling
  • 427 mm GPU clearance fits long graphics cards
  • USB 3.2 Gen 2 Type-C and two Type-A ports give fast front I/O
  • Tempered glass panels on two sides show off the build

Mid-tower ATX chassis with back-connect support

The JONSBO X400 GRAY is a mid-tower case built for ATX, Micro-ATX and ITX motherboards including back-connect designs. A 3D skeletal frame and double-glazed tempered glass panels create a sea-view showcase for component lighting. It targets builders who want a clean internal layout and room for high-end air or liquid cooling.

Steel and glass construction with thirteen fan

The chassis uses ABS, SPCC steel and tempered glass. Thirteen optional fan positions cover top, bottom, side, rear and back zones, while radiator support reaches 360 mm on the side and 240, 280 or 360 mm top and bottom. Front I/O provides two USB 3.2 Gen 1 Type-A ports, one USB 3.2 Gen 2 Type-C port and a TRRS jack. Dust filters are fitted throughout.

Upgrades from tighter mid-towers

Builders moving from cases limited to shorter graphics cards or narrower CPU cooler clearance gain 427 mm GPU length, 176 mm cooler height and 180 mm PSU depth. The back-connect motherboard tray removes cable clutter from the main chamber, and vertical GPU mounting is possible with a separate bracket and riser cable. The jump is worth it when a 360 mm side radiator and full-length card must coexist.

Přednosti

  • Back-connect motherboard support keeps internal cabling tidy
  • 13 fan positions plus side 360 mm radiator room enable high airflow cooling
  • 427 mm GPU clearance fits long graphics cards
  • USB 3.2 Gen 2 Type-C and two Type-A ports give fast front I/O
  • Tempered glass panels on two sides show off the build

Specifikace

Motherboard CompatibilityMicro ATX / ATX / ITX
ColorGray
Case MaterialABS / SPCC / Tempered Glass
TypeMicro ATX / ATX / ITX
Dust FiltersYes
Front PortsUSB 3.2 Gen 1 Type-A: 2/ USB 3.2 Gen 2 Type-C: 1 ‌TRRS x 1
BrandJonsbo
SeriesX400 SERIES
ModelX400 GRAY
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays1
Expansion Slots7
Fan OptionsTop：3×120mm/2×140mm (Optional)
Back：2×120mm (Optional)
Side：3×120mm (Optional)
Rear：2×120mm (Optional)
Bottom：3×120mm (Optional)
Radiator OptionsTop/Bottom：240/280/360 AIO Side：360 AIO
Max GPU Length427 mm
Max CPU Cooler Height176 mm
Max PSU Length180 mm
Dimensions460.2×310.3x476.5mm 18.12x12.22x18.76”
Weight10.2KGS 22.49lb

Otázky k tomuto produktu

What USB standard does the front Type-C port use and what speed does it cap at?

The front USB 3.2 Gen 2 Type-C port runs at up to 10 Gbps, while the two Type-A ports are USB 3.2 Gen 1 at 5 Gbps.

What are the maximum GPU length and CPU cooler height this case can accommodate?

The case fits graphics cards up to 427 mm long and CPU coolers up to 176 mm tall.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.