Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Four green DDR3 DIMMs with black heat spreaders

Kingston Technology Corp.

Kingston Technology Corp. KVR16R11D4K4/32I 32GB (4 x 8GB) DDR3 1600 ECC Registered CL11 server RAM

SKU CH-RNKJ-2DF9C MPN KVR16R11D4K4/32I

A 32GB quad-channel kit of 240-pin DDR3 ECC registered memory running at 1600 MHz with CL11 latency and 1.50V operation

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • ECC registered design detects and corrects single-bit memory errors
  • 32 GB total capacity in a matched four-module kit
  • DDR3 1600 speed rated at CL11 latency
  • 240-pin DIMM form factor fits standard server sockets
  • 50 V operation meets JEDEC standard specification

Server memory kit

This kit provides 32 GB of DDR3 registered ECC memory in a matched set of four 8 GB modules. It is built for servers and workstations that require error correction and registered signalling for stable operation under continuous load. The modules conform to JEDEC standard specifications and are validated through Advanced Validation Labs testing.

Thermals and power

Each module operates at the standard DDR3 voltage of 1.50 V, keeping power draw predictable in densely populated memory channels. Registered buffering reduces electrical loading on the memory controller, which helps maintain signal integrity without increasing heat output. Passive cooling is sufficient for typical server chassis airflow.

Capacity and configuration

The 32 GB total capacity is delivered as a quad-channel kit of four 8 GB sticks, allowing full population of four slots on compatible platforms. Buyers who need larger individual modules or higher densities should look elsewhere. The 240-pin DDR3 form factor limits use to systems designed for that generation.

Přednosti

  • ECC registered design detects and corrects single-bit memory errors
  • 32 GB total capacity in a matched four-module kit
  • DDR3 1600 speed rated at CL11 latency
  • 240-pin DIMM form factor fits standard server sockets
  • 50 V operation meets JEDEC standard specification

Specifikace

BrandKingston
ModelKVR16R11D4K4/32I
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Přepravní hmotnost0.11 kg
Rozměry balení168 × 104 × 41 mm

Otázky k tomuto produktu

How do I install the 240-Pin DDR3 registered DIMMs and what step is often missed?

Align the notch on each 240-Pin module with the slot key, press firmly until both retention clips click, and ensure the registered buffer engages by seating all four 8GB sticks in the correct channel order for your server board.

What maintenance or replacement will the ECC registered kit need over time?

The modules themselves require no scheduled maintenance; ECC corrects single-bit errors on the fly, and a stick only needs replacement if the system logs uncorrectable errors or a module fails POST testing.

What limit appears first when the 1600 CL11 1.50V kit runs under sustained load?

The DDR3 1600 JEDEC specification caps data rate at 1600 MT/s and voltage at 1.50V, so sustained throughput and thermal headroom hit that electrical ceiling before any other bottleneck.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.