暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Kingston Technology Corp.

Kingston Technology Corp. KVR16R11D4K4/32I 32GB (4 x 8GB) DDR3 1600 ECC Registered CL11 server RAM

SKU CH-RNKJ-2DF9C MPN KVR16R11D4K4/32I

A 32GB quad-channel kit of 240-pin DDR3 ECC registered memory running at 1600 MHz with CL11 latency and 1.50V operation

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1600
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • ECC registered design detects and corrects single-bit memory errors
  • 32 GB total capacity in a matched four-module kit
  • DDR3 1600 speed rated at CL11 latency
  • 240-pin DIMM form factor fits standard server sockets
  • 50 V operation meets JEDEC standard specification

Server memory kit

This kit provides 32 GB of DDR3 registered ECC memory in a matched set of four 8 GB modules. It is built for servers and workstations that require error correction and registered signalling for stable operation under continuous load. The modules conform to JEDEC standard specifications and are validated through Advanced Validation Labs testing.

Thermals and power

Each module operates at the standard DDR3 voltage of 1.50 V, keeping power draw predictable in densely populated memory channels. Registered buffering reduces electrical loading on the memory controller, which helps maintain signal integrity without increasing heat output. Passive cooling is sufficient for typical server chassis airflow.

Capacity and configuration

The 32 GB total capacity is delivered as a quad-channel kit of four 8 GB sticks, allowing full population of four slots on compatible platforms. Buyers who need larger individual modules or higher densities should look elsewhere. The 240-pin DDR3 form factor limits use to systems designed for that generation.

特長

  • ECC registered design detects and corrects single-bit memory errors
  • 32 GB total capacity in a matched four-module kit
  • DDR3 1600 speed rated at CL11 latency
  • 240-pin DIMM form factor fits standard server sockets
  • 50 V operation meets JEDEC standard specification

仕様

BrandKingston
ModelKVR16R11D4K4/32I
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1600
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
配送重量0.11 kg
梱包サイズ168 × 104 × 41 mm

この商品に関する質問

How do I install the 240-Pin DDR3 registered DIMMs and what step is often missed?

Align the notch on each 240-Pin module with the slot key, press firmly until both retention clips click, and ensure the registered buffer engages by seating all four 8GB sticks in the correct channel order for your server board.

What maintenance or replacement will the ECC registered kit need over time?

The modules themselves require no scheduled maintenance; ECC corrects single-bit errors on the fly, and a stick only needs replacement if the system logs uncorrectable errors or a module fails POST testing.

What limit appears first when the 1600 CL11 1.50V kit runs under sustained load?

The DDR3 1600 JEDEC specification caps data rate at 1600 MT/s and voltage at 1.50V, so sustained throughput and thermal headroom hit that electrical ceiling before any other bottleneck.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。