Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black steel ATX mid tower with continuous front top mesh, tempered glass side panels, two 160 mm front fans and one 140 mm rear fan

Lian Li

Lian Li LANCOOL 216X ATX Mid Tower PC Case

SKU CH-5QTZ-8HP9E MPN LANCOOL 216X

ATX mid-tower with continuous mesh front and top, tempered glass sides, two 160 mm and one 140 mm PWM fans pre-installed, supports 392 mm GPU and 360 mm radiators

  • TypeATX Mid Tower
  • Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
  • Side Panel2 x Sides Tempered Glass Panel
  • Front Ports2 x Buttons, 2 x USB 3.0, 1 x USB Type-C, 1 x Audio
  • Fan OptionsFront - 3 x 120mm / Midplate - 2 x 120mm / Midplate - 2 x 14
  • Pre-installed FansFront - 2 x 160mm / Rear - 1 x 140mm

Options 216X

  • Continuous mesh front and top panels feed fresh air to components
  • Two 160 mm front PWM fans plus one 140 mm rear fan move high airflow out of the box
  • Front I/O module relocates to lower left for flexible desk placement
  • Fits graphics cards up to 392 mm long and CPU coolers up to 180.5 mm tall
  • Supports 360 mm radiators at front and top plus 240 mm at bottom for liquid cooling

Case type and airflow

The Lian Li LANCOOL 216X is an ATX mid-tower chassis built around continuous front-to-top mesh panels. Two 160 mm PWM fans at the front and one 140 mm fan at the rear come pre-installed to move air through the mesh without restriction. The design targets builders who want strong thermal headroom for high-power components in a standard footprint.

Builders who need flexible I/O and radiator space

The front I/O module can be moved to the lower left corner, helping cable routing in tight desk setups. Radiator mounts support up to 360 mm at the front and top, plus 240 mm at the bottom, covering most custom-loop plans. Users who require 5.25-inch bays, a vertical GPU mount kit included, or a significantly smaller case should look elsewhere.

Maximum graphics-card length of 392 mm

This dimension clears current flagship cards including the 4000 series without touching the front fans or radiator. If your selected GPU exceeds 392 mm, the side panel will not close and the card will not fit.

Přednosti

  • Continuous mesh front and top panels feed fresh air to components
  • Two 160 mm front PWM fans plus one 140 mm rear fan move high airflow out of the box
  • Front I/O module relocates to lower left for flexible desk placement
  • Fits graphics cards up to 392 mm long and CPU coolers up to 180.5 mm tall
  • Supports 360 mm radiators at front and top plus 240 mm at bottom for liquid cooling

Specifikace

TypeATX Mid Tower
Motherboard CompatibilityATX / E-ATX / Micro ATX / Mini ITX
Side Panel2 x Sides Tempered Glass Panel
Front Ports2 x Buttons, 2 x USB 3.0, 1 x USB Type-C, 1 x Audio
Fan OptionsFront - 3 x 120mm / Midplate - 2 x 120mm / Midplate - 2 x 140mm / Rear - 1 x 120mm / Top - 3 x 120mm
Pre-installed FansFront - 2 x 160mm / Rear - 1 x 140mm
Radiator OptionsBottom - Up to 240mm / Front - Up to 360mm / Top - Up to 360mm
Max GPU Length392 mm
Max CPU Cooler Height180.5 mm
Max PSU Length220 mm
Dimensions18.94" x 9.25" x 19.36"
Přepravní hmotnost12.70 kg
Rozměry balení582 × 572 × 300 mm

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

How long a graphics card can fit in the LANCOOL 216X?

The case accepts GPUs up to 392 mm in length, covering current 4000-series models.

What noise and heat levels should I expect with the pre-installed fans running continuously?

Two 160 mm front PWM fans and one 140 mm rear PWM fan are included; they adjust speed automatically to balance airflow and acoustics under load.

Which motherboard form factors are supported without extra brackets?

ATX, E-ATX, Micro-ATX and Mini-ITX boards all mount directly to the supplied standoffs.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.