Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Five-inch HDMI touchscreen with toughened glass panel and narrow bezel

LORDWORLD

LORDWORLD 5 Inch HDMI Touchscreen 1024x600 IPS 800cd/m² Toughened Glass Capacitive Touch Development Board

SKU CH-R8SX-MFQ6R

A 5-inch IPS touchscreen with 1024×600 resolution, 800 cd/m² brightness and 178° viewing angles connects via HDMI to Raspberry Pi, Jetson Nano or Windows PCs without extra drivers

  • High 800cd/m² brightness for clear outdoor visibility
  • 1024×600 IPS panel delivers wide 178° viewing angles
  • Toughened glass capacitive touch supports 5-point input
  • Works with Raspberry Pi, Jetson Nano and Windows 11/10/8.1/8/7
  • Driver-free HDMI connection simplifies development setup

5-inch HDMI development display

This five-inch HDMI touchscreen delivers 1024 by 600 resolution on an IPS panel rated at 800 cd/m². It targets makers and engineers who need a compact, high-brightness monitor for Raspberry Pi, Jetson Nano, TX2, Xavier NX or Orin boards. The integrated structure and toughened glass keep the assembly slim for embedded projects. No separate driver installation is required for the supported operating systems.

Sustained desktop and kiosk operation

The IPS panel maintains consistent colour and contrast up to a 178-degree viewing angle during long sessions. Capacitive touch registers five simultaneous points or single-point input without latency spikes. Because the unit draws power and video over a single HDMI link, thermal load stays low even when the display runs continuously in dashboard or kiosk roles. Windows 11, 10, 8.1, 8 and 7 all recognise the display immediately.

Toughened glass and narrow bezel mounting

A hardened glass surface resists scratches and minor impacts common in portable prototypes. The narrow bezel reduces the overall footprint, allowing the screen to sit flush in custom enclosures or handheld rigs. HDMI connectivity means one cable carries both signal and touch data, simplifying cable routing inside tight chassis. The integrated structure eliminates separate controller boards that could loosen under vibration.

Přednosti

  • High 800cd/m² brightness for clear outdoor visibility
  • 1024×600 IPS panel delivers wide 178° viewing angles
  • Toughened glass capacitive touch supports 5-point input
  • Works with Raspberry Pi, Jetson Nano and Windows 11/10/8.1/8/7
  • Driver-free HDMI connection simplifies development setup

Specifikace

BrandLORDWORLD

Otázky k tomuto produktu

How much power does the 800 cd/m² panel draw when running all day?

The display draws power from the host HDMI port; typical consumption is low enough for Raspberry Pi or Jetson boards to supply without an extra adapter.

Which cables or adapters must I already own to connect this touchscreen?

You need a standard HDMI cable and a USB cable for the capacitive touch data link; both are common with Raspberry Pi and Jetson kits.

Will the 1024×600 resolution scale cleanly on an older Raspberry Pi 3 running Windows 10?

Yes, the panel is driver-free on Windows 10 and 11, and the HDMI interface works with any Pi model that outputs 1024×600.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.