Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
7 inch DSI touch display with IPS panel and anti-fingerprint glass

LORDWORLD

LORDWORLD 7" DSI Touch Display 1280x720 IPS 10-Point Anti-Fingerprint Optical Bonding

SKU CH-VAP4-8SE4W

A 7-inch 1280×720 IPS touch display with 10-point capacitive input, anti-fingerprint glass, optical bonding and DSI interface for Raspberry Pi and embedded boards

  • 10-point capacitive touch with anti-fingerprint glass for smooth interaction
  • 1280×720 IPS panel with 170° wide viewing angle for crisp visuals
  • Direct DSI interface works with Raspberry Pi 3B+/4B/5/CM4 without extra drivers
  • Optical bonding and 6H-hardness glass reduce glare while saving space
  • Software-adjustable backlight via PWM control optimises power for embedded projects

7" DSI Touch Display for Development

The LORDWORLD 7-inch capacitive touch display connects directly to Raspberry Pi 3B+, 4B, 5 and CM4 boards via DSI. It also supports ESP32-P4, RK3506 and RK3576 platforms for IoT and embedded development. The 1280x720 IPS panel provides a 170-degree viewing angle. No additional drivers are required for integration.

Suited for Direct DSI Integration Projects

This display suits developers building compact Raspberry Pi or ESP32-P4 projects that need a direct DSI interface and 10-point touch input. The slim 9.3mm profile with optical bonding fits space-constrained enclosures. Builders requiring HDMI, LVDS or eDP connectivity cannot use this panel. Projects needing larger screen sizes should look at alternative form factors.

1280x720 IPS Resolution Decides Fit

The 1280x720 resolution defines the available pixel density for your interface design. Text rendering, touch target sizing and graphical asset scaling all depend on this fixed specification. Verify that your application layout works within this resolution before purchasing. The 10-point capacitive layer and anti-fingerprint glass complete the input experience.

Přednosti

  • 10-point capacitive touch with anti-fingerprint glass for smooth interaction
  • 1280×720 IPS panel with 170° wide viewing angle for crisp visuals
  • Direct DSI interface works with Raspberry Pi 3B+/4B/5/CM4 without extra drivers
  • Optical bonding and 6H-hardness glass reduce glare while saving space
  • Software-adjustable backlight via PWM control optimises power for embedded projects

Specifikace

BrandLORDWORLD

Otázky k tomuto produktu

Which host board with a DSI port do I need to connect this display?

The display uses a direct DSI connection compatible with Raspberry Pi 3B+, 4B, 5 and CM4, as well as ESP32-P4, RK3506 and RK3576 development boards.

Will the 1280×720 IPS panel work alongside an existing HDMI monitor on the same Raspberry Pi?

Yes, the DSI interface operates independently from the HDMI port, so the 1280×720 IPS panel can run simultaneously with an HDMI monitor on supported Raspberry Pi models.

How can I verify the 10-point capacitive touch and PWM backlight are functioning after setup?

Test multi-finger gestures to confirm all 10 touch points register, then adjust brightness via software PWM control to verify the backlight responds smoothly across its range.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.