Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular circuit board with dual RJ45 ports, two HDMI sockets, M.2 NVMe slot and 40-pin GPIO header

LORDWORLD

LORDWORLD Dual Ethernet Base Board for Raspberry Pi CM5 2.5G 1G RJ45 Dual MIPI NVMe development board

SKU CH-W8K5-R9V59

A dual Ethernet base board for Raspberry Pi CM5 adds 2.5G and 1G RJ45 ports, dual 4K HDMI, dual MIPI interfaces, a 40-pin GPIO header and an M.2 NVMe slot for SSD boot

  • High-speed networking with 2.5G and 1G RJ45 ports
  • Simultaneous dual 4K HDMI and dual MIPI display outputs
  • Plug-and-play Compute Module 5 support via standard socket and 40PIN GPIO
  • Faster boot and storage using M.2 NVMe SSD slot
  • Rich I/O expansion for industrial IoT and AI gateway projects

Dual Ethernet Carrier for Compute Module 5

This carrier board adds one 2.5G and one 1G RJ45 port to a Raspberry Pi Compute Module 5, targeting builders of routers, NAS units or firewalls. It accepts both Lite and eMMC module variants and exposes a colour-coded 40-pin GPIO header for peripheral expansion. The design is aimed at developers who need wired multi-gigabit connectivity in a compact edge device.

M.2 NVMe Slot Plus Dual Display Interfaces

An onboard M.2 slot enables NVMe SSD boot, removing the microSD bottleneck for faster OS performance. Dual 4K HDMI outputs and dual MIPI connectors support simultaneous displays or cameras, freeing the developer from single-screen constraints. The board supplies the physical sockets; the Compute Module 5 itself must be sourced separately to complete the system.

Sustained Network and Storage Throughput

Under continuous load the dual Ethernet links maintain high-bandwidth routing or file-server traffic without the thermal throttling seen on single-port designs. The NVMe interface keeps sequential read and write speeds stable during long backup or streaming sessions, avoiding the slowdown typical of microSD storage. Builders needing wireless connectivity or additional PCIe lanes will need a different platform.

Přednosti

  • High-speed networking with 2.5G and 1G RJ45 ports
  • Simultaneous dual 4K HDMI and dual MIPI display outputs
  • Plug-and-play Compute Module 5 support via standard socket and 40PIN GPIO
  • Faster boot and storage using M.2 NVMe SSD slot
  • Rich I/O expansion for industrial IoT and AI gateway projects

Specifikace

BrandLORDWORLD

Otázky k tomuto produktu

Will the 2.5 GbE port saturate before the CM5 CPU under sustained load?

The 2.5 GbE interface provides 2.5 Gbps bandwidth; actual throughput depends on the Compute Module 5 workload and any NVMe storage activity.

Does the board need active cooling when both Ethernet ports run continuously?

No fan header or heatsink is mentioned; the board relies on the CM5 module's own thermal design and ambient airflow.

Must I already own a Compute Module 5 to use this base board?

Yes, the board is built for Compute Module 5 Lite and eMMC versions and requires one to operate.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.