Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se

LORDWORLD

LORDWORLD PCIe 3 Ports 1394A Firewire Adapter Low Profile Bracket

SKU CH-FT44-FMRAZ

Adds three FireWire ports (two 6-pin, one 4-pin) via a PCIe x1 slot with 2.5Gb/s throughput and IEEE 1394a 400/200/100Mbps support

  • Adds three FireWire ports to a desktop via a single PCIe lane
  • 5 Gb/s full-duplex PCIe 1.0a link keeps data flowing
  • 400/200/100 Mbps IEEE 1394 speeds cover DV and legacy gear
  • Low-profile bracket fits slim and standard cases alike
  • OpenHCI 1.0/1.1 compliance ensures broad OS and device support

PCIe 1394A FireWire Adapter

The LORDWORLD adapter adds three IEEE 1394A ports to a desktop PC through a single-lane PCI Express 1.0a slot. It is intended for users who need to connect legacy DV cameras, external hard drives or other FireWire 400 devices to a modern system.

Low-profile bracket and port mix

A low-profile bracket is included for small-form-factor cases, while the rear panel provides two 6-pin and one 4-pin connectors. The card draws power from the slot itself, so no external power cable is required, but the controller does not support hot-plugging; the system must be powered off before devices are attached or removed.

Thermals, noise and power draw

As a passive controller card with no onboard fan, it produces no audible noise and adds negligible heat to the chassis. Power consumption is limited to the PCIe x1 slot envelope, making it compatible with standard desktop power supplies without extra connectors.

Přednosti

  • Adds three FireWire ports to a desktop via a single PCIe lane
  • 5 Gb/s full-duplex PCIe 1.0a link keeps data flowing
  • 400/200/100 Mbps IEEE 1394 speeds cover DV and legacy gear
  • Low-profile bracket fits slim and standard cases alike
  • OpenHCI 1.0/1.1 compliance ensures broad OS and device support

Specifikace

BrandLORDWORLD

Otázky k tomuto produktu

What PCIe lane width and revision does this card use, and what practical throughput does that cap?

It uses a single x1 lane compliant with PCI-Express Revision 1.0a, giving a 2.5 Gb/s full-duplex channel that limits total bandwidth to that rate.

What bracket and slot dimensions are needed to mount this adapter?

A standard low-profile bracket is included; the card occupies one x1 or larger PCIe slot and requires the rear-panel cut-out for three external ports (two 6-pin, one 4-pin).

How is the card installed, and what step do users often miss?

Power off the PC, insert the card into a free x1 slot, secure the low-profile bracket, then connect devices — hot-plugging is not supported, so power must stay off until the card is fully seated.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.