Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
MakerBot MP07325 Smart Extruder+ silver metal unit with 0.4 mm nozzle

MakerBot

MakerBot MP07325 Smart Extruder+ 0.4 mm nozzle 3D printers accessory

SKU CH-6803-C897J MPN MP07325

Swappable 0.4 mm extruder for 5th-generation Replicator Mini and Desktop printers, requiring firmware 1.9+ and MakerBot Desktop 3.9+ to reduce clogging and enable quick replacement

  • Compatible SystemMakerBot Replicator Mini Compact 3D Printer (5th generation
  • SpecificationSoftware Requirements: Firmware 1.9 or higher and MakerBot D
  • FeaturesThe swappable MakerBot Replicator 5th-Gen/Mini Smart Extrude
  • Faster filament changes thanks to swappable modular design
  • Reduced clogging and jams from improved extruder connectivity
  • Reliable prints with 0.4 mm nozzle precision
  • Works with Replicator Mini and Desktop 5th Gen
  • Requires firmware 1.9+ and MakerBot Desktop 3.9+

Compatible 5th-Gen MakerBot Printers

The Smart Extruder+ MP07325 fits the MakerBot Replicator Mini Compact and the MakerBot Replicator Desktop, both 5th generation models. It requires firmware 1.9 or higher and MakerBot Desktop 3.9 or higher. The swappable module lets operators restore printing capability in minutes without specialised tools.

Thermals Noise Power

The 0.4 mm nozzle extrudes filament at standard temperatures for PLA materials. Improved connectivity between the extruder and printer reduces communication errors that can cause failed prints. The design targets fewer filament jams and reduced clogging, which limits wasted material and the need for manual intervention during long builds.

Replaces Earlier Extruders

This unit replaces the previous iteration of MakerBot extruders for the same 5th-generation platforms. Enhanced homing and connectivity deliver better reliability and longevity for production workflows. It is not suited for printers outside the listed 5th-generation Replicator Mini and Desktop models or for users requiring a different nozzle diameter.

Přednosti

  • Faster filament changes thanks to swappable modular design
  • Reduced clogging and jams from improved extruder connectivity
  • Reliable prints with 0.4 mm nozzle precision
  • Works with Replicator Mini and Desktop 5th Gen
  • Requires firmware 1.9+ and MakerBot Desktop 3.9+

Specifikace

BrandMakerbot
ModelMP07325
Compatible SystemMakerBot Replicator Mini Compact 3D Printer (5th generation model)
MakerBot Replicator Desktop 3D Printer (5th generation model)
SpecificationSoftware Requirements: Firmware 1.9 or higher and MakerBot Desktop 3.9 and higher
Nozzle Diameter: 400 microns / 0.4 mm
FeaturesThe swappable MakerBot Replicator 5th-Gen/Mini Smart Extruder+ improves upon the previous iteration of MakerBot Extruders by delivering enhanced connectivity between the Extruder and the 3D printer, improved homing, reduced instances of filament clogging, and fewer filament jams-all of which translates to improved reliability, longevity, and overall performance.
The Smart Extruder+ minimizes downtime by enabling you to replace a worn extruder in minutes. Its modular design lets you plan for the natural wear common to 3D printing extruders. By keeping a spare Smart Extruder+ handy, yo
Přepravní hmotnost0.36 kg
Rozměry balení180 × 127 × 58 mm

Otázky k tomuto produktu

How do I install the Smart Extruder+ on my Replicator Mini, and which step do people skip?

Slide the extruder into the carriage until the magnetic connector seats firmly, then run the firmware 1.9 update and MakerBot Desktop 3.9 calibration; users often forget the software update and homing routine.

What part will wear out first and need replacement?

The 0.4 mm nozzle and drive gear inside the extruder wear with filament abrasion; the modular unit is designed to be swapped in minutes when print quality drops.

What limits print time before the extruder overheats or jams?

Sustained high-temperature printing can heat-soak the compact carriage, triggering thermal protection; improved homing and connectivity reduce but do not eliminate this limit.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.