Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
2.5 inch U.3 enterprise SSD, silver metal casing, 7mm height

Micron Technology, Inc.

Micron Technology, Inc. MTFDKCB7T6TDZ-1AZ1ZABYY 7400 PRO 7.68TB enterprise SSD

SKU CH-855F-Z9YJE MPN MTFDKCB7T6TDZ-1AZ1ZABYY

2.5-inch U.3 drive holds 7.68TB of 3D TLC storage over PCI-Express 4.0 with NVMe 1.4, reaching 6600 MBps read and 5400 MBps write

  • Capacity7.68TB
  • Memory Components3D TLC
  • InterfacePCI-Express 4.0, NVMe v1.4
  • Max Sequential ReadUp to 6600 MBps
  • Max Sequential WriteUp to 5400 MBps
  • 4KB Random ReadUp to 1,000,000 IOPS
  • 68TB capacity supports large enterprise datasets
  • PCIe 4.0 interface delivers up to 6600 MBps sequential reads
  • 3D TLC NAND provides up to 1,000,000 IOPS random reads
  • Low 15 µs write latency accelerates transactional workloads
  • Operates reliably from 0°C to 70°C

Micron 7400 PRO 7.68TB U.3 NVMe drive

This Micron 7400 PRO enterprise SSD delivers 7.68TB of 3D TLC storage in a 2.5-inch U.3 form factor. It connects through a PCI-Express 4.0 interface using NVMe v1.4 protocol. The drive targets data-centre workloads that demand high-capacity read-intensive performance with consistent low latency.

Verify U.3 backplane and PCIe 4.0 slot availability

Before ordering, confirm the server or storage array provides a U.3 backplane with PCI-Express 4.0 electrical support. The 7.00mm z-height matches standard 2.5-inch bays, but the connector keying requires a compatible U.3 or tri-mode slot. Ensure the platform BIOS and drive firmware are current for NVMe v1.4 feature enablement.

Sustained throughput with 15 µs write latency

Under continuous load the drive maintains up to 5400 MBps sequential write and 190000 IOPS random write while keeping write latency at 15 µs. Sequential read reaches 6600 MBps and random read hits 1000000 IOPS with 75 µs read latency. The 0°C to 70°C operating range supports steady-state performance inside dense chassis without thermal throttling.

Přednosti

  • 68TB capacity supports large enterprise datasets
  • PCIe 4.0 interface delivers up to 6600 MBps sequential reads
  • 3D TLC NAND provides up to 1,000,000 IOPS random reads
  • Low 15 µs write latency accelerates transactional workloads
  • Operates reliably from 0°C to 70°C

Specifikace

BrandMicron
Series7400 PRO
ModelMTFDKCB7T6TDZ-1AZ1ZABYY
Capacity7.68TB
Memory Components3D TLC
InterfacePCI-Express 4.0, NVMe v1.4
Max Sequential ReadUp to 6600 MBps
Max Sequential WriteUp to 5400 MBps
4KB Random ReadUp to 1,000,000 IOPS
4KB Random WriteUp to 190,000 IOPS
Read Latency75 µs
Write Latency15 µs
Operating Temperature0°C ~ +70°C
Height7.00mm
Přepravní hmotnost0.05 kg
Rozměry balení130 × 97 × 15 mm

Otázky k tomuto produktu

Does the 2.5" U.3 7.68TB drive ship with any mounting hardware or cables?

The drive is supplied as a bare 2.5" U.3 unit; mounting brackets, screws and U.3 or PCIe cabling must be sourced separately.

Why choose the 7.68TB capacity over other 7400 PRO sizes?

The 7.68TB model provides the highest density in the 7400 PRO line, maximising storage per 2.5" bay while keeping the same 6600 MBps read and 5400 MBps write ceilings.

What does the 6600 MBps sequential read figure mean for a live server workload?

It represents the peak throughput the controller can sustain on large-block reads; real-world speed will depend on queue depth, CPU overhead and thermal limits inside the chassis.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.