Micron Technology, Inc.
Micron Technology, Inc. MTFDKCB7T6TDZ-1AZ1ZABYY 7400 PRO 7.68TB enterprise SSD
2.5-inch U.3 drive holds 7.68TB of 3D TLC storage over PCI-Express 4.0 with NVMe 1.4, reaching 6600 MBps read and 5400 MBps write
- Capacity7.68TB
- Memory Components3D TLC
- InterfacePCI-Express 4.0, NVMe v1.4
- Max Sequential ReadUp to 6600 MBps
- Max Sequential WriteUp to 5400 MBps
- 4KB Random ReadUp to 1,000,000 IOPS
- 68TB capacity supports large enterprise datasets
- PCIe 4.0 interface delivers up to 6600 MBps sequential reads
- 3D TLC NAND provides up to 1,000,000 IOPS random reads
- Low 15 µs write latency accelerates transactional workloads
- Operates reliably from 0°C to 70°C
Micron 7400 PRO 7.68TB U.3 NVMe drive
This Micron 7400 PRO enterprise SSD delivers 7.68TB of 3D TLC storage in a 2.5-inch U.3 form factor. It connects through a PCI-Express 4.0 interface using NVMe v1.4 protocol. The drive targets data-centre workloads that demand high-capacity read-intensive performance with consistent low latency.
Verify U.3 backplane and PCIe 4.0 slot availability
Before ordering, confirm the server or storage array provides a U.3 backplane with PCI-Express 4.0 electrical support. The 7.00mm z-height matches standard 2.5-inch bays, but the connector keying requires a compatible U.3 or tri-mode slot. Ensure the platform BIOS and drive firmware are current for NVMe v1.4 feature enablement.
Sustained throughput with 15 µs write latency
Under continuous load the drive maintains up to 5400 MBps sequential write and 190000 IOPS random write while keeping write latency at 15 µs. Sequential read reaches 6600 MBps and random read hits 1000000 IOPS with 75 µs read latency. The 0°C to 70°C operating range supports steady-state performance inside dense chassis without thermal throttling.
Puntos fuertes
- 68TB capacity supports large enterprise datasets
- PCIe 4.0 interface delivers up to 6600 MBps sequential reads
- 3D TLC NAND provides up to 1,000,000 IOPS random reads
- Low 15 µs write latency accelerates transactional workloads
- Operates reliably from 0°C to 70°C
Especificaciones
| Brand | Micron |
|---|---|
| Series | 7400 PRO |
| Model | MTFDKCB7T6TDZ-1AZ1ZABYY |
| Capacity | 7.68TB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 4.0, NVMe v1.4 |
| Max Sequential Read | Up to 6600 MBps |
| Max Sequential Write | Up to 5400 MBps |
| 4KB Random Read | Up to 1,000,000 IOPS |
| 4KB Random Write | Up to 190,000 IOPS |
| Read Latency | 75 µs |
| Write Latency | 15 µs |
| Operating Temperature | 0°C ~ +70°C |
| Height | 7.00mm |
| Peso de envío | 0.05 kg |
| Dimensiones del paquete | 130 × 97 × 15 mm |
Preguntas sobre este artículo
Does the 2.5" U.3 7.68TB drive ship with any mounting hardware or cables?
The drive is supplied as a bare 2.5" U.3 unit; mounting brackets, screws and U.3 or PCIe cabling must be sourced separately.
Why choose the 7.68TB capacity over other 7400 PRO sizes?
The 7.68TB model provides the highest density in the 7400 PRO line, maximising storage per 2.5" bay while keeping the same 6600 MBps read and 5400 MBps write ceilings.
What does the 6600 MBps sequential read figure mean for a live server workload?
It represents the peak throughput the controller can sustain on large-block reads; real-world speed will depend on queue depth, CPU overhead and thermal limits inside the chassis.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio bloqueado 30 minutos.
