Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Black ATX mid-tower case with tinted glass side panel and mesh front, three ARGB fans visible inside

Montech

Montech KING 65 PRO (B) ATX Mid Tower PC Case

SKU CH-FXX8-FHYPG MPN KING 65 PRO (B)

A dual-chamber ATX mid-tower case with high-airflow mesh panels, tool-free glass access, and three pre-installed ARGB fans supports GPUs up to 420 mm, CPU coolers up to 175 mm.

  • TypeATX Mid Tower
  • ColorBlack
  • With Power SupplyNo
  • Side Panelwith Side Window
  • LEDARGB
  • Internal 3.5" Drive Bays2

Options KING 65 PRO (Black)

  • Tool-free glass panels simplify builds and upgrades
  • High-airflow mesh panels deliver strong cooling performance
  • Dual-chamber layout fits 420 mm graphics cards
  • Three pre-installed ARGB fans provide lighting and airflow
  • Supports five 2.5-inch SSDs or two 3.5-inch HDDs

Dual-Chamber Mid-Tower Build

The Montech KING 65 PRO (B) is an ATX mid-tower case built around a dual-chamber layout that separates the power supply and drive cages from the main component area. Tool-free tempered glass panels and a spacious interior suit system builders who value quick assembly and easy future upgrades. Three pre-installed ARGB PWM fans provide immediate cooling and lighting without extra purchases.

Cooling Capacity and Limits

High-airflow mesh panels feed a flexible fan and radiator topology: the top accepts up to 360 mm or 280 mm radiators, the side supports 240 mm or 140 mm units, and the rear takes a 120 mm radiator. Fan mounts include bottom positions for two 140 mm or three 120 mm fans, top for two 140 mm or three 120 mm, rear for one 120 mm, and side for two 120 mm or two 140 mm fans. Graphics cards up to 420 mm long, CPU coolers up to 175 mm tall, and power supplies up to 190 mm deep fit comfortably; longer GPUs, taller coolers, or deeper PSUs will not install.

Upgrade Context

The case replaces older single-chamber enclosures that restrict airflow and cable routing behind the motherboard tray. Its dual-chamber design and 420 mm GPU clearance make the jump worthwhile when moving to modern high-wattage graphics cards such as RTX 40 Series models that demand generous length and strong front-to-rear airflow. Builders upgrading from cramped chassis gain seven expansion slots, support for five 2.5-inch SSDs or two 3.5-inch HDDs, and a cleaner internal layout without changing motherboard form factor.

Přednosti

  • Tool-free glass panels simplify builds and upgrades
  • High-airflow mesh panels deliver strong cooling performance
  • Dual-chamber layout fits 420 mm graphics cards
  • Three pre-installed ARGB fans provide lighting and airflow
  • Supports five 2.5-inch SSDs or two 3.5-inch HDDs

Specifikace

BrandMontech
SeriesKing 65 PRO
ModelKING 65 PRO (B)
TypeATX Mid Tower
ColorBlack
With Power SupplyNo
Side Panelwith Side Window
LEDARGB
Internal 3.5" Drive Bays2
Internal 2.5" Drive Bays5
Expansion Slots7
Fan OptionsBottom: 2 x 140mm / 3 x 120mm
Top: 2 x 140mm / 3 x 120mm
Rear: 1 x 120mm (1 x 120mm ARGB PWM Fan Pre-Installed)
Side: 2 x 120mm / 2 x 140mm (2 x 140mm ARGB PWM Fans Pre-Installed)
Radiator OptionsTop: 360/280 mm
Side: 240/140 mm
Rear: 120 mm
Max GPU Length420 mm
Max CPU Cooler Height175 mm
Max PSU Length190 mm
Dimensions18.7" x 11.81" x 17.4"
Přepravní hmotnost13.61 kg
Rozměry balení559 × 508 × 381 mm

Další verze tohoto modelu

Dalších 3 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will my existing ATX motherboard and 420 mm GPU fit in the dual-chamber layout?

Yes — the case supports standard ATX boards and graphics cards up to 420 mm long, so your current parts will install without modification.

How can I confirm the three pre-installed ARGB fans are running and synced after I build?

Connect the included ARGB PWM fans to a 5 V ARGB header and a PWM fan header on the motherboard, then use the board’s lighting software to verify colour control and speed curves.

Which drives and power supply do I need to buy separately?

The chassis includes two 3.5" bays and five 2.5" bays but ships without drives; you must also supply an ATX power supply up to 190 mm long.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.