Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR5 RDIMM modules, bare circuit boards with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 128GB 2x64GB DDR5 5600 ECC RDIMM memory upgrade for GIGABYTE MZ33-CP1

SKU CH-SVSN-9S6JA

A 128 GB DDR5 ECC RDIMM kit built for the GIGABYTE MZ33-CP1, running at 5600 MHz with CL46 latency and 1.1 V operation

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Zobrazit dalších 24 konfigurací
  • 128 GB total capacity from two 64 GB modules for high-density server workloads
  • DDR5 5600 speed (PC5-44800) with CL46 latency delivers rated throughput
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx4 rank matches the board's exact voltage and population rules
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard slots precisely

Exact-match DDR5 kit for GIGABYTE MZ33-CP1

This 128GB kit delivers two 64GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.1V operation. It is built specifically for the GIGABYTE MZ33-CP1 motherboard, matching the exact rank, voltage and timing the platform expects so the full capacity is recognised at rated speed.

Registered ECC architecture for full-slot stability

Each module uses a 2Rx4 registered design that buffers address and command signals, letting every slot run fully populated without overloading the memory controller. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. The 288-pin RDIMM form factor fits only boards wired for registered DDR5.

Two-module kit with lifetime support

The package contains exactly two 64GB RDIMMs, no heat spreaders and no extra cables or software. NEMIX RAM backs the kit with a lifetime replacement warranty and free US-based technical support, so integration questions can be resolved without chasing third-party vendors. Buyers needing UDIMM, SODIMM or non-ECC modules must look elsewhere.

Přednosti

  • 128 GB total capacity from two 64 GB modules for high-density server workloads
  • DDR5 5600 speed (PC5-44800) with CL46 latency delivers rated throughput
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx4 rank matches the board's exact voltage and population rules
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard slots precisely

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What DDR5 speed and PC5 rating does this 128GB kit run at?

This kit operates at DDR5 5600 with a PC5-44800 rating, matching the GIGABYTE MZ33-CP1 motherboard's supported memory speed for full rated performance.

What physical form factor and pin count must the motherboard slots accept?

The modules are 288-pin DDR5 RDIMMs, the registered form factor required by the GIGABYTE MZ33-CP1; they will not fit UDIMM or SODIMM slots.

How should the two 64GB RDIMMs be installed in the server board?

Install both modules in the DIMM slots specified by the GIGABYTE MZ33-CP1 manual for a two-DIMM population; the board's population order must be followed so the registered ECC kit is recognised at full 128GB capacity.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.