Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 128GB (8x16GB) DDR5 4800 CL40 ECC RDIMM SuperMicro Server memory upgrade

SKU CH-MJC8-PJEFR

Eight 16 GB DDR5 ECC RDIMM modules at 4800 MT/s with CL40 latency and 1.10 V operation, validated for SuperMicro GPU SuperServer platforms

  • Capacity128GB (8 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 128 GB total capacity from eight 16 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM for server error correction
  • CL40 CAS latency at 1.1 V operating voltage
  • 288-pin 1Rx8 design validated for SuperMicro systems

Capacity and configuration

This NEMIX RAM kit delivers 128GB of DDR5 memory across eight 16GB registered DIMMs. It is built for Supermicro GPU SuperServer systems such as the SYS-821GE-TNHR, SYS-821GV-TNR and SYS-421GE-TNRT that require ECC RDIMM modules.

Suited workloads and limits

The kit fits administrators who need maximum registered ECC capacity in a single Supermicro server chassis. It does not suit builds that use unbuffered UDIMMs, platforms limited to fewer than eight slots, or workloads that demand speeds above DDR5 4800.

Deciding specification

The modules run at DDR5 4800 with a CAS latency of CL40 and a voltage of 1.10V, so the platform must support that exact speed, latency and registered ECC signalling for the kit to operate correctly.

Přednosti

  • 128 GB total capacity from eight 16 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM for server error correction
  • CL40 CAS latency at 1.1 V operating voltage
  • 288-pin 1Rx8 design validated for SuperMicro systems

Specifikace

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K8
Capacity128GB (8 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (8X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Otázky k tomuto produktu

How do I install the 288-pin DDR5 RDIMM modules in my SuperMicro server and which step is often missed?

Power down the server, open the chassis, align each module's notch with the slot key, press firmly until both retention clips click, then verify all eight modules are recognised in the BIOS memory map.

What maintenance or replacement will the 1Rx8 ECC RDIMM kit need over its service life?

No scheduled maintenance is required; ECC corrects single-bit errors on the fly, and modules are replaced only if the server logs uncorrectable errors or a module fails POST.

What limit appears first when the 4800 MT/s CL40 1.1 V kit runs sustained workloads?

The CAS 40 latency at 4800 MT/s sets the throughput ceiling before thermal or voltage limits are reached.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.