Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular memory module with gold edge contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 ECC RDIMM 1.2V CL21 2Rx8 Dell PowerEdge MX740C memory upgrade

SKU CH-GQ5C-5XA91

Adds 16 GB of DDR4 2933 ECC registered memory with CL21 timing at 1.2 V for the Dell PowerEdge MX740C

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity expands server memory for larger workloads
  • DDR4 2933 MT/s speed delivers high bandwidth for demanding applications
  • ECC registered design detects and corrects data errors automatically
  • 2 V operation reduces power draw in dense configurations
  • 288-pin RDIMM form factor fits Dell PowerEdge MX740C slots

Dell PowerEdge MX740C memory upgrade

This 16 GB DDR4 registered DIMM is built for the Dell PowerEdge MX740C server. It delivers ECC error correction and registered signalling for stable operation in multi-socket enterprise workloads. The module runs at 2933 MT/s with CL21 latency at 1.2 V.

Replaces slower or smaller RDIMMs

Swapping out lower-speed DDR4 modules or lower-capacity sticks lets the memory subsystem keep pace with demanding virtualization and database tasks. The upgrade is worth it when the platform supports 2933 MT/s registered ECC memory and the workload benefits from the extra 16 GB per slot.

Fits 288-pin DDR4 RDIMM slots

The single-rank 2Rx8 module occupies one DIMM slot and requires a server board that accepts registered ECC DDR4 at 1.2 V. No heat spreader is fitted, so airflow in the chassis must handle thermal management. It frees a slot for future expansion while adding 16 GB of registered capacity.

Přednosti

  • 16 GB capacity expands server memory for larger workloads
  • DDR4 2933 MT/s speed delivers high bandwidth for demanding applications
  • ECC registered design detects and corrects data errors automatically
  • 2 V operation reduces power draw in dense configurations
  • 288-pin RDIMM form factor fits Dell PowerEdge MX740C slots

Specifikace

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-628K1
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Otázky k tomuto produktu

Does the 288-pin DDR4 RDIMM fit the Dell PowerEdge MX740C memory slots?

Yes, the 288-pin DDR4 RDIMM form factor matches the Dell PowerEdge MX740C memory slots for direct installation.

What is the correct orientation step when installing this CL21 registered module?

Align the notch on the 288-pin edge connector with the slot key, press down evenly until both side latches click, confirming the registered module is fully seated.

When should the 16GB ECC RDIMM be replaced in a Dell PowerEdge MX740C?

Replace the module if the system logs uncorrectable ECC errors, fails memory diagnostics, or no longer recognises the 16GB capacity during POST.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.