Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green rectangular circuit board with gold edge connectors and black memory chips visible

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 ECC RDIMM 2Rx8 CL21 1.2V 288-Pin Dell PowerEdge FC640

SKU CH-PMZ1-Q99TJ

16GB DDR4 2933 ECC registered DIMM with CL21 latency and 1.2V operation for Dell PowerEdge FC640 servers

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 2933 MHz boosts server throughput
  • ECC registered design protects data integrity
  • 2Rx8 dual-rank layout maximises memory density
  • 20 V operation lowers power draw
  • Validated for Dell PowerEdge FC640 compatibility

Dell PowerEdge FC640 compatible memory

This 16 GB DDR4 2933 module is built for the Dell PowerEdge FC640 server. It delivers ECC registered operation for data integrity in enterprise workloads. The single DIMM format suits capacity upgrades or replacement in qualified systems. IT teams maintaining this platform can install it without proprietary Dell part sourcing.

Registered ECC RDIMM build

Registered buffering reduces electrical load on the server memory controller for stable operation at 2933 MT/s. The 288-pin DDR4 RDIMM keying prevents insertion into unbuffered or consumer slots. ECC circuitry corrects single-bit errors to protect critical data. No heat spreader is fitted, matching the original Dell thermal design for this chassis.

2933 MT/s CL21 2Rx8 specification

The module runs at DDR4 2933 (PC4-23400) with CAS latency 21 at 1.2 V. Dual-rank 2Rx8 organisation provides density for the FC640 memory architecture. Systems requiring a different speed grade, rank configuration or voltage will not operate correctly with this part.

Přednosti

  • 16 GB DDR4 2933 MHz boosts server throughput
  • ECC registered design protects data integrity
  • 2Rx8 dual-rank layout maximises memory density
  • 20 V operation lowers power draw
  • Validated for Dell PowerEdge FC640 compatibility

Specifikace

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-628K1
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Otázky k tomuto produktu

What does the DDR4 2933 (PC4-23400) rating mean for maximum data rate?

The module runs at 2933 MT/s, giving a peak bandwidth of PC4-23400; the server memory controller will not exceed this speed.

Will this 288-pin RDIMM fit the Dell PowerEdge FC640 memory slots?

Yes, the 288-pin DDR4 RDIMM form factor matches the FC640 DIMM slots; the registered design and 2Rx8 organisation are supported by that platform.

How do I install the module, and what step is often missed?

Power off the server, open the chassis, align the notch on the 288-pin edge connector with the slot key, press firmly until both retention clips click, then verify in BIOS that the 16 GB appears at 2933 MT/s with ECC active.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.