Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with black memory chips on both sides, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 288-pin UDIMM desktop RAM

SKU CH-C6KR-FSWS1

16 GB DDR4 desktop module running at 3200 MT/s with CL22 timing and 1.2 V operation

  • Capacity16GB
  • Type288-pin DDR4 UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCNo
  • 16 GB DDR4 3200 MHz boosts desktop responsiveness
  • CL22 latency keeps timing tight for everyday workloads
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard DDR4 motherboard slots
  • Built with Samsung, Micron or Hynix chips for reliable quality

16 GB DDR4 UDIMM for desktop upgrades

This module adds 16 GB of DDR4 memory to a compatible desktop motherboard. It uses the standard 288-pin UDIMM form factor and runs at 3200 MT/s with a CAS latency of CL22. The kit is aimed at users who need a straightforward capacity increase for everyday workloads.

Tool-free installation with slot alignment

Installation consists of opening the case, aligning the notch on the module with the key in the slot, and pressing down until the retention clips click. The most common issue is inserting the stick backwards or not seating it fully, which prevents the system from posting. No heat spreader is fitted, so clearance is rarely a concern.

1.20 V operating voltage determines compatibility

The module operates at 1.20 V, which is the standard voltage for DDR4 UDIMM memory. If your motherboard or BIOS only supports different voltage levels, this stick will not function correctly. Match the voltage requirement before purchasing.

Přednosti

  • 16 GB DDR4 3200 MHz boosts desktop responsiveness
  • CL22 latency keeps timing tight for everyday workloads
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM fits standard DDR4 motherboard slots
  • Built with Samsung, Micron or Hynix chips for reliable quality

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD25600-628K1
Capacity16GB
Type288-pin DDR4 UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Otázky k tomuto produktu

How can I verify the module runs at DDR4 3200 CL22 after installation?

Enter the BIOS or use a tool such as CPU-Z to confirm the memory frequency shows 3200 MT/s and the CAS latency reads 22.

What items are included with the 16 GB stick?

The package contains one 288-pin UDIMM module rated at 1.20 V with 2Rx8 organisation.

Which version should I choose for a Dell system needing part SNPC5N22C/16G?

Select the MD25600-628K1 module; it matches the Dell part number AB120717 and provides 16 GB in a single rank-8 configuration.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.