Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with black memory chips on both sides, 288 gold contacts along the bottom edge, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 ECC UDIMM CL22 1Rx8 1.2V 288-Pin Supermicro X12STE-F X12STD-F memory upgrade

SKU CH-QH4K-GYVW8

16 GB DDR4 3200 ECC UDIMM module with CL22 timing and 1.2 V operation, validated for Supermicro X12STE-F and X12STD-F motherboards

  • Capacity16GB
  • Type288-Pin DDR4 ECC UDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 16GB

  • Error-correcting ECC memory prevents silent data corruption and crashes
  • Exact-match DDR4-3200 PC4-25600 CL22 1.2V 288-pin UDIMM recognised at full rated speed
  • Verified fitment for Supermicro X12STE-F and X12STD-F motherboards requiring unbuffered ECC DIMMs
  • 16GB single-rank 1Rx8 module using major OEM chips from Samsung Micron Hynix
  • Lifetime replacement coverage with free US-based technical support included

Exact-match upgrade

This 16 GB DDR4 ECC UDIMM is built for the Supermicro X12STE-F and X12STD-F motherboards. It delivers the precise 1Rx8 rank, 1.2 V voltage and CL22 timing the memory controller expects. The module installs as a single 288-pin DIMM and runs at the rated 3200 MT/s speed without manual tuning.

Verified fitment

The unbuffered ECC form factor matches the board's 288-pin DDR4 slots and population rules, avoiding the RDIMM or SODIMM mismatch that would prevent boot. ECC circuitry detects and corrects single-bit errors on the fly, protecting data integrity in always-on workloads. Builders must still consult the motherboard manual for approved slot order and maximum capacity limits.

Sustained reliability

Major-brand Samsung, Micron or Hynix DRAM chips operate at the standard 1.2 V, keeping thermal output low during continuous operation. The CL22 latency remains stable across long compute sessions, and the lifetime replacement warranty backs the module for the system's service life. This kit is not suited for platforms that require registered memory or non-ECC operation.

Přednosti

  • Error-correcting ECC memory prevents silent data corruption and crashes
  • Exact-match DDR4-3200 PC4-25600 CL22 1.2V 288-pin UDIMM recognised at full rated speed
  • Verified fitment for Supermicro X12STE-F and X12STD-F motherboards requiring unbuffered ECC DIMMs
  • 16GB single-rank 1Rx8 module using major OEM chips from Samsung Micron Hynix
  • Lifetime replacement coverage with free US-based technical support included

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 ECC Unbuffered UDIMM Memory
Part NumberME25600-618K1
Capacity16GB
Type288-Pin DDR4 ECC UDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC UDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Does CL22 at 3200 MT/s create a latency bottleneck under sustained workloads?

CL22 is the rated CAS latency; the module runs at its specified 3200 MT/s timing without additional delay.

How much heat and power does a 1.2 V DDR4 ECC UDIMM produce during all-day operation?

The module operates at 1.20 V with no heat spreader; power draw stays within standard DDR4 limits for continuous use.

What motherboard slot and memory type must my system already have for this 288-pin UDIMM to work?

Your board needs a DDR4 288-pin UDIMM slot that supports unbuffered ECC memory.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.