Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR4 2933MHz PC4-23400 2Rx8 CL21 1.2V 288-Pin UDIMM Supermicro X12SCQ X12SCZ-QF memory upgrade

SKU CH-KVHB-BZYYY

32GB DDR4 2933MHz UDIMM with CL21 timing and 1.2V operation for Supermicro X12SCQ and X12SCZ-QF motherboards

  • Capacity32GB
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Size 32GB

  • 32GB capacity lets your Supermicro board handle larger workloads
  • DDR4-2933 speed matches the memory controller for full-rated performance
  • CL21 latency at 1.2V delivers stable operation without extra voltage
  • 2Rx8 unbuffered UDIMM fits the exact slot and population rules required
  • Major OEM chips from Samsung, Micron or Hynix tested for reliability at rated specs

Capacity and Compatibility

This 32GB DDR4-2933 module is built for Supermicro X12SCQ and X12SCZ-QF motherboards. It delivers the exact 2Rx8 Non-ECC unbuffered configuration those boards require. The 288-pin UDIMM form factor matches the desktop slots on these specific platforms.

Upgrade Path

The kit replaces lower-capacity DDR4 DIMMs running at slower speeds or tighter latencies that limit throughput. The jump is worth it when your workload needs the full 32GB single-module density at the board's native 2933MT/s rate with CL21 timing and 1.20V operation.

Build Integration

The module needs a free 288-pin UDIMM slot and a motherboard memory controller that supports the specified 2Rx8 rank structure at 1.2V. It frees up additional slots for future expansion while populating the board according to its validated population rules.

Přednosti

  • 32GB capacity lets your Supermicro board handle larger workloads
  • DDR4-2933 speed matches the memory controller for full-rated performance
  • CL21 latency at 1.2V delivers stable operation without extra voltage
  • 2Rx8 unbuffered UDIMM fits the exact slot and population rules required
  • Major OEM chips from Samsung, Micron or Hynix tested for reliability at rated specs

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR4 Non-ECC Unbuffered UDIMM Memory
Part NumberMD23400-328K1
Capacity32GB
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN Non-ECC UDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

Will the 288-pin DDR4 UDIMM fit the Supermicro X12SCQ motherboard slots?

Yes, the 288-pin UDIMM form factor matches the DDR4 slots on the Supermicro X12SCQ and X12SCZ-QF motherboards.

What BIOS setting or step is often missed when installing this 32GB DDR4 2933MHz module?

After seating the module firmly until the retention clips click, enter the BIOS and verify the memory is detected at 2933 MHz with CL21 timing at 1.2 V.

How long will the Samsung, Micron or Hynix chips on this 32GB kit last before replacement is needed?

The major OEM DRAM chips are rated for continuous operation at the specified 1.2 V and 2933 MHz; no scheduled replacement is required under normal desktop use.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.