Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Two green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 192GB 2x96GB DDR5 5600 CL46 1.1V ECC RDIMM Supermicro X14SDW-64CM-SP9F memory upgrade

SKU CH-HAKA-9618K

192 GB DDR5 ECC registered server memory kit, two 96 GB modules at 5600 MT/s CL46 1.1 V, validated for Supermicro X14SDW-64CM-SP9F

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Zobrazit dalších 4 konfigurací
  • 192 GB capacity in a 2 x 96 GB kit enables large memory footprints for virtualization and databases
  • DDR5-5600 (PC5-44800) speed delivers high bandwidth for data-intensive server workloads
  • Registered ECC with 2Rx4 organization provides error correction and signal buffering for full-slot stability
  • 1 V operation matches the platform's voltage requirement for reliable memory-controller initialization
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-64CM-SP9F motherboard's DDR5 slots exactly

Exact-match upgrade for Supermicro X14SDW

This 192GB kit contains two 96GB DDR5 5600 RDIMM modules built to the 2Rx4 1.1V CL46 specification the Supermicro X14SDW-64CM-SP9F expects. Registered ECC architecture offloads the memory controller so every slot runs fully populated at rated speed. The kit is new and spec-matched to the board's population rules.

Registered ECC RDIMM build and 288-pin fit

Modules use major OEM Samsung Micron Hynix chips without heat spreaders for dense server chassis airflow. The 288-pin registered form factor is the only type this motherboard accepts not UDIMM or SODIMM. Registered buffering stabilises electrical load across all populated channels while ECC corrects single-bit errors on the fly.

Verify capacity limits and population order

Server memory support varies by model so consult your system or motherboard manual for supported capacities approved DIMM population order and installation steps before purchase. This kit will not fit boards that require UDIMM SODIMM or a different DDR generation. Buyers needing non-ECC unbuffered modules or a different voltage should look elsewhere.

Přednosti

  • 192 GB capacity in a 2 x 96 GB kit enables large memory footprints for virtualization and databases
  • DDR5-5600 (PC5-44800) speed delivers high bandwidth for data-intensive server workloads
  • Registered ECC with 2Rx4 organization provides error correction and signal buffering for full-slot stability
  • 1 V operation matches the platform's voltage requirement for reliable memory-controller initialization
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-64CM-SP9F motherboard's DDR5 slots exactly

Specifikace

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Další verze tohoto modelu

Dalších 5 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What DDR5 speed and PC5 rating does this 192GB kit run at?

The kit operates at DDR5 5600 with a PC5-44800 data rate, matching the Supermicro X14SDW-64CM-SP9F motherboard specification exactly.

What physical slot and pin count does this RDIMM kit require?

Each module is a 288-pin DDR5 RDIMM; the motherboard needs matching registered DIMM slots, not UDIMM or SODIMM sockets.

How should I populate the two 96GB modules on the Supermicro board?

Install both RDIMMs in the slots specified by the motherboard manual for a two-DIMM population; the manual's sequence ensures the memory controller initialises the full 192GB at rated speed.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.