我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 192GB 2x96GB DDR5 5600 CL46 1.1V ECC RDIMM Supermicro X14SDW-64CM-SP9F memory upgrade

SKU CH-HAKA-9618K

192 GB DDR5 ECC registered server memory kit, two 96 GB modules at 5600 MT/s CL46 1.1 V, validated for Supermicro X14SDW-64CM-SP9F

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 192 GB capacity in a 2 x 96 GB kit enables large memory footprints for virtualization and databases
  • DDR5-5600 (PC5-44800) speed delivers high bandwidth for data-intensive server workloads
  • Registered ECC with 2Rx4 organization provides error correction and signal buffering for full-slot stability
  • 1 V operation matches the platform's voltage requirement for reliable memory-controller initialization
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-64CM-SP9F motherboard's DDR5 slots exactly

Exact-match upgrade for Supermicro X14SDW

This 192GB kit contains two 96GB DDR5 5600 RDIMM modules built to the 2Rx4 1.1V CL46 specification the Supermicro X14SDW-64CM-SP9F expects. Registered ECC architecture offloads the memory controller so every slot runs fully populated at rated speed. The kit is new and spec-matched to the board's population rules.

Registered ECC RDIMM build and 288-pin fit

Modules use major OEM Samsung Micron Hynix chips without heat spreaders for dense server chassis airflow. The 288-pin registered form factor is the only type this motherboard accepts not UDIMM or SODIMM. Registered buffering stabilises electrical load across all populated channels while ECC corrects single-bit errors on the fly.

Verify capacity limits and population order

Server memory support varies by model so consult your system or motherboard manual for supported capacities approved DIMM population order and installation steps before purchase. This kit will not fit boards that require UDIMM SODIMM or a different DDR generation. Buyers needing non-ECC unbuffered modules or a different voltage should look elsewhere.

商品特色

  • 192 GB capacity in a 2 x 96 GB kit enables large memory footprints for virtualization and databases
  • DDR5-5600 (PC5-44800) speed delivers high bandwidth for data-intensive server workloads
  • Registered ECC with 2Rx4 organization provides error correction and signal buffering for full-slot stability
  • 1 V operation matches the platform's voltage requirement for reliable memory-controller initialization
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-64CM-SP9F motherboard's DDR5 slots exactly

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What DDR5 speed and PC5 rating does this 192GB kit run at?

The kit operates at DDR5 5600 with a PC5-44800 data rate, matching the Supermicro X14SDW-64CM-SP9F motherboard specification exactly.

What physical slot and pin count does this RDIMM kit require?

Each module is a 288-pin DDR5 RDIMM; the motherboard needs matching registered DIMM slots, not UDIMM or SODIMM sockets.

How should I populate the two 96GB modules on the Supermicro board?

Install both RDIMMs in the slots specified by the motherboard manual for a two-DIMM population; the manual's sequence ensures the memory controller initialises the full 192GB at rated speed.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。