我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600MHz 384GB 4x96GB ECC Registered RDIMM CL46 1.1V Supermicro X14SDW-72C-SP9F memory upgrade

SKU CH-2MZN-BE5A0

384 GB DDR5-5600 registered ECC kit in four 96 GB modules, CL46 at 1.1 V, validated for Supermicro X14SDW-72C-SP9F

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

顯示另外 4 款選項
  • 384 GB total capacity from four 96 GB modules
  • DDR5 5600 MHz speed with CL46 latency for rated performance
  • Registered ECC architecture corrects single-bit errors on the fly
  • 10 V operation matches server memory controller requirements
  • Exact-match kit verified for Supermicro X14SDW-72C-SP9F motherboard

384GB DDR5 ECC RDIMM kit for Supermicro X14SDW

This 384GB kit contains four 96GB DDR5 5600MHz Registered ECC RDIMMs built to the exact specifications of the Supermicro X14SDW-72C-SP9F motherboard. Each module operates at 1.1V with CL46 latency and a 2Rx4 rank configuration. The registered design ensures full capacity recognition and stable operation across all populated slots.

Upgrade from smaller RDIMM sets or lower speeds

Replacing a partial kit or slower DDR5 modules with this matched 384GB set removes the risk of mixed-rank instability and enables the memory controller to run every channel at the rated 5600MHz data rate. The jump is worth it when the workload demands maximum registered ECC capacity and the motherboard manual confirms support for this population layout.

DDR5 RDIMM limits within the platform

The DDR5 interface on this platform delivers 5600MHz bandwidth through the 288-pin registered form factor, but total capacity and population order are governed by the motherboard firmware. Registered ECC modules add command buffering that supports full-slot loading, yet the final usable configuration depends on the system manual's approved DIMM sequence and maximum supported density per slot.

商品特色

  • 384 GB total capacity from four 96 GB modules
  • DDR5 5600 MHz speed with CL46 latency for rated performance
  • Registered ECC architecture corrects single-bit errors on the fly
  • 10 V operation matches server memory controller requirements
  • Exact-match kit verified for Supermicro X14SDW-72C-SP9F motherboard

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品，記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

Will the 288-pin RDIMM modules fit the Supermicro X14SDW-72C-SP9F motherboard?

Yes, the kit uses the 288-pin DDR5 RDIMM form factor that the X14SDW-72C-SP9F requires; it is not a UDIMM or SODIMM.

What is the correct population order when installing all four 96GB modules?

Consult the motherboard manual for the approved DIMM population sequence; the kit is spec-matched to the board's rules but the exact slot order is defined by Supermicro.

When should the ECC Registered RDIMMs be replaced in a production server?

Replace modules if ECC logs show rising correctable error counts or if the system reports uncorrectable errors, as the registered design and ECC are intended to prevent silent data corruption.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。