我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款,直接購入真正的硬體設備。 全球訂單滿 US$399,即享免費保險運送。簡約外箱,不印任何品牌標誌,從德國出貨。訂單滿 US$399,即享免費保險運送。 結帳一開始,您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對,並享有 24 個月保固。原廠密封,保固 24 個月。

追蹤清單 登入

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 6400 CL52 1.1V 4Rx4 ECC Registered RDIMM memory upgrade

SKU CH-Y2J4-HPFKE

256GB DDR5-6400 ECC Registered RDIMM kit (2×128GB) validated for Supermicro X14SRG-TF motherboards

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 256 GB capacity from two 128 GB modules expands server memory headroom
  • DDR5 6400 speed with CL52 latency delivers rated throughput for demanding workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 4Rx4 rank matches the memory controller's exact requirements
  • 288-pin RDIMM form factor fits Supermicro X14SRG-TF motherboard slots precisely

Exact-match kit for Supermicro X14SRG-TF

This 256 GB DDR5 kit contains two 128 GB registered ECC RDIMMs built to the board's precise rank, voltage and timing requirements. It is intended for administrators upgrading that specific Supermicro motherboard with memory the controller will recognise at full capacity and rated speed.

Registered 4Rx4 ECC at 1.1 V

The modules run at DDR5 6400 (PC5-51200) with CL52 latency and a 1.10 V operating voltage. Registered architecture and 4Rx4 organisation let the memory controller drive every slot fully populated while on-die ECC corrects single-bit errors before they affect production workloads.

256 GB headroom for dense virtualisation

Two 128 GB DIMMs fill two slots and deliver the maximum capacity this kit provides, supporting large VM counts and in-memory databases. Builders needing more than 256 GB or a different form factor such as UDIMM or SODIMM must look elsewhere.

商品特色

  • 256 GB capacity from two 128 GB modules expands server memory headroom
  • DDR5 6400 speed with CL52 latency delivers rated throughput for demanding workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 4Rx4 rank matches the memory controller's exact requirements
  • 288-pin RDIMM form factor fits Supermicro X14SRG-TF motherboard slots precisely

商品規格

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

其他版本

同系列還有 5 款

同系列產品,記憶體、散熱器或時脈不同 — 下單前請先比較。

商品問答

What does the 6400 MT/s speed mean once this kit is installed in a Supermicro X14SRG-TF?

The modules run at DDR5-6400 (PC5-51200) with CL52 latency at 1.1 V, delivering the exact data rate the motherboard's memory controller expects for full-capacity operation.

How does the 288-pin RDIMM interface limit or enable use on this board?

The 288-pin Registered DIMM form factor is required by the X14SRG-TF; it will not accept UDIMM or SODIMM modules, and the registered design allows every slot to be populated at 128 GB per DIMM.

What physical clearance and slot layout does this 2 x 128 GB kit need?

Each 288-pin RDIMM fits a standard DDR5 server DIMM slot with no heat spreader, so verify the motherboard's population order in the manual before installing both modules.

同類商品

顧客也比較過

同一分類,同一套結帳流程 — 支援八種加密貨幣,匯率鎖定 30 分鐘。