Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two green DDR5 RDIMM sticks without heat spreaders, 288 pins, sold as a 256GB kit

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 6400 CL52 1.1V 4Rx4 ECC Registered RDIMM memory upgrade

SKU CH-Y2J4-HPFKE

256GB DDR5-6400 ECC Registered RDIMM kit (2×128GB) validated for Supermicro X14SRG-TF motherboards

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 256GB 2X128GB

Pokaż jeszcze 4 konfiguracji
  • 256 GB capacity from two 128 GB modules expands server memory headroom
  • DDR5 6400 speed with CL52 latency delivers rated throughput for demanding workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 4Rx4 rank matches the memory controller's exact requirements
  • 288-pin RDIMM form factor fits Supermicro X14SRG-TF motherboard slots precisely

Exact-match kit for Supermicro X14SRG-TF

This 256 GB DDR5 kit contains two 128 GB registered ECC RDIMMs built to the board's precise rank, voltage and timing requirements. It is intended for administrators upgrading that specific Supermicro motherboard with memory the controller will recognise at full capacity and rated speed.

Registered 4Rx4 ECC at 1.1 V

The modules run at DDR5 6400 (PC5-51200) with CL52 latency and a 1.10 V operating voltage. Registered architecture and 4Rx4 organisation let the memory controller drive every slot fully populated while on-die ECC corrects single-bit errors before they affect production workloads.

256 GB headroom for dense virtualisation

Two 128 GB DIMMs fill two slots and deliver the maximum capacity this kit provides, supporting large VM counts and in-memory databases. Builders needing more than 256 GB or a different form factor such as UDIMM or SODIMM must look elsewhere.

Najważniejsze cechy

  • 256 GB capacity from two 128 GB modules expands server memory headroom
  • DDR5 6400 speed with CL52 latency delivers rated throughput for demanding workloads
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 10 V operation at 4Rx4 rank matches the memory controller's exact requirements
  • 288-pin RDIMM form factor fits Supermicro X14SRG-TF motherboard slots precisely

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

What does the 6400 MT/s speed mean once this kit is installed in a Supermicro X14SRG-TF?

The modules run at DDR5-6400 (PC5-51200) with CL52 latency at 1.1 V, delivering the exact data rate the motherboard's memory controller expects for full-capacity operation.

How does the 288-pin RDIMM interface limit or enable use on this board?

The 288-pin Registered DIMM form factor is required by the X14SRG-TF; it will not accept UDIMM or SODIMM modules, and the registered design allows every slot to be populated at 128 GB per DIMM.

What physical clearance and slot layout does this 2 x 128 GB kit need?

Each 288-pin RDIMM fits a standard DDR5 server DIMM slot with no heat spreader, so verify the motherboard's population order in the manual before installing both modules.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.