Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się

NEMIX RAM

NEMIX RAM 256GB 2x128GB DDR5 6400 CL52 1.1V ECC Registered RDIMM memory upgrade

SKU CH-JTYS-1CEC5

A 256GB DDR5 server memory kit with two 128GB registered ECC RDIMMs running at 6400MHz CL52 and 1.1V for the Supermicro X14SDW-64CM-SP9F motherboard

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth for memory-intensive tasks
  • 1 V operation at 4Rx4 registered ECC reduces power draw while maintaining data integrity
  • 288-pin RDIMM form factor matches Supermicro X14SDW-64CM-SP9F motherboard requirements exactly
  • Major OEM Samsung, Micron or Hynix chips ensure enterprise-grade reliability and compatibility

Exact-Match DDR5 Server Upgrade

This 256 GB kit delivers two 128 GB DDR5 6400 Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro X14SDW-64CM-SP9F memory controller expects. The 4Rx4 organisation and 1.10 V operation let the board recognise full capacity at rated speed without manual tuning. It is not for systems that require unbuffered UDIMMs or SODIMM form factors.

Sustained Load Behaviour

Registered buffering offloads the memory controller so every slot runs fully populated at 6400 MT/s during continuous workloads. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots that would otherwise interrupt production tasks. The CL52 latency remains stable across extended operation because the modules are specified for the platform's native timing.

Thermals Noise and Power

Operating at 1.10 V keeps power draw low for dense 128 GB densities, reducing heat output in fully populated servers. No heat spreaders are fitted, relying on chassis airflow for cooling rather than adding acoustic noise from active components. The low-voltage DDR5 design helps maintain thermal headroom when all DIMM slots are occupied.

Najważniejsze cechy

  • 256 GB total capacity from two 128 GB modules for high-density server workloads
  • DDR5 6400 speed with CL52 latency delivers rated bandwidth for memory-intensive tasks
  • 1 V operation at 4Rx4 registered ECC reduces power draw while maintaining data integrity
  • 288-pin RDIMM form factor matches Supermicro X14SDW-64CM-SP9F motherboard requirements exactly
  • Major OEM Samsung, Micron or Hynix chips ensure enterprise-grade reliability and compatibility

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

How much power does the 1.10V DDR5 kit draw when running continuously in a fully populated server?

Each module operates at the standard DDR5 voltage of 1.10V, keeping per-DIMM power low even with all slots filled.

What motherboard slot and population rules must the Supermicro X14SDW-64CM-SP9F already have to accept this 288-pin RDIMM kit?

The board needs DDR5 RDIMM slots and must support 4Rx4 registered DIMMs populated per the manual's approved order.

Will the 6400 CL52 registered ECC modules run at rated speed alongside slower DDR5 DIMMs already installed?

The memory controller will clock all populated slots to the lowest common speed, so mixing with slower DDR5 forces this kit to downclock.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.