NEMIX RAM DDR5 6400 ECC RDIMM 256GB 8x32GB CL52 1.1V 288-pin memory upgrade
- 256GB (8 x 32GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
A 256GB DDR5 server memory kit with two 128GB registered ECC RDIMMs running at 6400MHz CL52 and 1.1V for the Supermicro X14SDW-64CM-SP9F motherboard
Size 256GB 2X128GB
This 256 GB kit delivers two 128 GB DDR5 6400 Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro X14SDW-64CM-SP9F memory controller expects. The 4Rx4 organisation and 1.10 V operation let the board recognise full capacity at rated speed without manual tuning. It is not for systems that require unbuffered UDIMMs or SODIMM form factors.
Registered buffering offloads the memory controller so every slot runs fully populated at 6400 MT/s during continuous workloads. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots that would otherwise interrupt production tasks. The CL52 latency remains stable across extended operation because the modules are specified for the platform's native timing.
Operating at 1.10 V keeps power draw low for dense 128 GB densities, reducing heat output in fully populated servers. No heat spreaders are fitted, relying on chassis airflow for cooling rather than adding acoustic noise from active components. The low-voltage DDR5 design helps maintain thermal headroom when all DIMM slots are occupied.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-744K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Each module operates at the standard DDR5 voltage of 1.10V, keeping per-DIMM power low even with all slots filled.
The board needs DDR5 RDIMM slots and must support 4Rx4 registered DIMMs populated per the manual's approved order.
The memory controller will clock all populated slots to the lowest common speed, so mixing with slower DDR5 forces this kit to downclock.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?