NEMIX RAM DDR5 5600 ECC RDIMM 256GB (2×128GB) 4Rx4 CL46 1.1V Supermicro X14SDW-72C-SP9F memory upgrade
- 256GB (2 x 128GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
256GB DDR5-6400 ECC Registered RDIMM kit (2×128GB) validated for Supermicro X14SRG-TF motherboards
Size 256GB 2X128GB
This 256 GB DDR5 kit contains two 128 GB registered ECC RDIMMs built to the board's precise rank, voltage and timing requirements. It is intended for administrators upgrading that specific Supermicro motherboard with memory the controller will recognise at full capacity and rated speed.
The modules run at DDR5 6400 (PC5-51200) with CL52 latency and a 1.10 V operating voltage. Registered architecture and 4Rx4 organisation let the memory controller drive every slot fully populated while on-die ECC corrects single-bit errors before they affect production workloads.
Two 128 GB DIMMs fill two slots and deliver the maximum capacity this kit provides, supporting large VM counts and in-memory databases. Builders needing more than 256 GB or a different form factor such as UDIMM or SODIMM must look elsewhere.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-744K2 |
| Capacity | 256GB (2 x 128GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 4Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 2X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The modules run at DDR5-6400 (PC5-51200) with CL52 latency at 1.1 V, delivering the exact data rate the motherboard's memory controller expects for full-capacity operation.
The 288-pin Registered DIMM form factor is required by the X14SRG-TF; it will not accept UDIMM or SODIMM modules, and the registered design allows every slot to be populated at 128 GB per DIMM.
Each 288-pin RDIMM fits a standard DDR5 server DIMM slot with no heat spreader, so verify the motherboard's population order in the manual before installing both modules.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?